Intel D102GGC2 manual Hi-Speed USB 2.0 Support, RJ-45 LAN Connector LEDs, LED State Indicates

Page 16

Intel Desktop Board D102GGC2 Product Guide

RJ-45 LAN Connector LEDs

Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2).

A B

OM18208

Figure 2. LAN Connector LEDs

Table 4 describes the LED states when the board is powered up and the 10/100 Ethernet LAN subsystem is operating.

Table 4. RJ-45 10/100 Ethernet LAN Connector LEDs

LED

LED State

Indicates

 

 

 

A (Green)

Off

LAN link is not established

 

 

 

 

On

LAN link is established

 

 

 

 

Blinking

LAN activity is occurring

 

 

 

B (Yellow)

Off

10 Mbits/s data rate is selected

 

 

 

 

On (steady state)

100 Mbits/s data rate is selected

 

 

 

Hi-Speed USB 2.0 Support

NOTE

Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device.

The desktop board supports up to eight USB 2.0; four ports routed to the back panel and four routed to two internal USB 2.0 headers. USB 2.0 ports are backward compatible with USB 1.1 devices. USB 1.1 devices will function normally at USB 1.1 speeds.

USB 2.0 support requires both an operating system and drivers that fully support USB 2.0 transfer rates. Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports to USB 1.1 operation. This may be required to accommodate operating systems that do not support USB 2.0.

16

Image 16
Contents Intel Desktop Board D102GGC2 Product Guide Revision History Revision Revision History DateFCC Declaration of Conformity Canadian Department of Communications Compliance StatementPreface Intended AudienceIntended Uses Document OrganizationBox Contents TerminologyContents Error Messages and Indicators Contents TablesViii Feature Summary Desktop Board FeaturesForm Factor Supported Operating Systems Related LinksDesktop Board Features Desktop Board ComponentsDesktop Boards D102GGC2 Components Label DescriptionPower Supply Requirements Platform Compatibility Guide Power Supply RequirementsProcessor Main MemoryGraphics Subsystem ATI RADEON* Xpress 200 ChipsetAudio Subsystem LAN Subsystem Input/Output I/O ControllerLAN Subsystem Software RJ-45 LAN Connector LEDs RJ-45 10/100 Ethernet LAN Connector LEDsHi-Speed USB 2.0 Support LED State IndicatesSerial ATA and IDE Auto Configuration PCI and PCI Express* Auto ConfigurationEnhanced IDE Interface Serial ATAPower Management Features Security PasswordsPower Connectors Chassis IntrusionFan Connectors Suspend to RAM Instantly Available PC TechnologyLocation of the Standby Power Indicator Wake from USBBattery SpeakerReal-Time Clock Wake from PS/2 Keyboard/MouseIntel Desktop Board D102GGC2 Product Guide Installing and Replacing Desktop Board Components Before You BeginPrevent Power Supply Overload Installation PrecautionsObserve Safety and Regulatory Requirements Installing the I/O Shield Installing and Replacing Desktop Board ComponentsInstalling and Removing the Desktop Board Desktop Board D102GGC2 Mounting Screw Hole LocationsInstalling and Removing a Processor Installing a ProcessorRemove the Protective Socket Cover Install Processor Connecting the Processor Fan Heat Sink Cable Installing the Processor Fan Heat SinkRemoving the Processor Installing and Removing Memory Installing DIMMsDimm Removing DIMMs Installing and Removing a PCI Express x16 Card Installing a PCI Express x16 CardRemoving the PCI Express x16 Card Removing a PCI Express x16 CardConnecting the IDE Cable Connecting the IDE CableConnecting the Serial ATA Sata Cable Connecting the Serial ATA CableConnecting Internal Headers Item DescriptionAC ’97 Audio Header Signal Names Installing a Front Panel Audio SolutionPin Signal Name Connecting Hi-Speed USB 2.0 Headers Connecting the Front Panel HeaderHi-Speed USB 2.0 Header Signal Names Front Panel Header Signal NamesMulti-Channel Analog Audio Connecting Chassis Fan Cables Location of the Chassis Fan HeadersConnecting Power Cables Connecting 2 x 12 Power Supply CablesOther Connectors Location of Other Connectors on Desktop Board D102GGC2Setting the Bios Configuration Jumper Location of the Bios Configuration Jumper BlockJumper Settings for the Bios Setup Program Modes Clearing PasswordsJumper Setting Mode Description Replacing the Battery PrecautionAvvertimento Awas Oсторога Removing the Battery Intel Desktop Board D102GGC2 Product Guide Updating the Bios with the Iflash Memory Update Utility Updating the BiosObtaining the Bios Update File Updating the Bios Recovering the BiosError Messages and Indicators Bios Beep CodesBios Error Messages Bios Error MessagesIntel Desktop Board D102GGC2 Product Guide Safety Regulations Place Battery MarkingSafety Regulations Regulatory ComplianceEuropean Union Declaration of Conformity Statement Recycling Considerations Product Ecology StatementsRegulatory Compliance Français Lead-Free Desktop Board Lead-Free Board MarkingsEMC Regulations EMC RegulationsProduct Certifications Ensure Electromagnetic Compatibility EMC ComplianceBoard-Level Certification Markings Product Certification MarkingsChassis and Component Certifications Europe

D102GGC2 specifications

The Intel D102GGC2 is a versatile and robust motherboard designed for the Intel LGA 775 socket, accommodating a variety of Intel processors including the Pentium, Celeron, and Core 2 Duo families. This motherboard is particularly noted for its solid performance and reliability, making it an excellent choice for both home and office environments.

One of its main features is support for up to 4GB of DDR2 RAM across its two DIMM slots, allowing users to enjoy improved multitasking capabilities and enhanced performance during demanding tasks. The motherboard supports dual-channel memory architecture, which further optimizes memory throughput and efficiency.

The D102GGC2 is equipped with an Intel 945GC chipset, known for its balanced performance in both processing and graphics capabilities. This chipset incorporates Intel Graphics Media Accelerator 950, providing decent integrated graphics performance for everyday computing needs, albeit less powerful than dedicated graphics cards. This feature is particularly beneficial for users who may not require high-end graphics performance for tasks like gaming or graphic design.

Storage options are abundant, with the motherboard featuring four SATA connectors to support modern hard drives and SSDs, allowing data transfer speeds of up to 3Gb/s. The incorporation of IDE support also means that users can connect legacy devices, making this motherboard versatile in accommodating older hardware.

Additional features include an array of USB ports, including USB 2.0 interfaces that support an external peripheral connection, crucial for today’s computing demands. The onboard Realtek ALC662 audio codec provides adequate sound quality for general use, making it suitable for multimedia applications as well.

From a networking perspective, the Intel D102GGC2 includes a 10/100 Ethernet port for reliable wired connectivity. This makes this motherboard an attractive option for users who prioritize stable network access, particularly in environments where wireless connections may be unreliable.

In terms of form factor, the D102GGC2 adheres to the Micro ATX standard, allowing it to fit into a wide range of cases while maximizing space for additional components. Overall, the Intel D102GGC2 motherboard offers a solid mix of features, performance, and expandability, making it a suitable choice for budget-conscious builds or as a reliable platform for everyday computing tasks. With a balance of modern connectivity options and legacy support, it caters to a variety of users looking for a dependable foundation for their PC needs.