Intel D101GGC manual Feature Summary, Form Factor

Page 9

1 Desktop Board Features

This chapter briefly describes the main features of Intel® Desktop Board D101GGC. Table 1 summarizes the major features of the desktop board.

Table 1. Feature Summary

Form Factor

MicroATX (243.84 millimeters [9.60 inches] x 218.44 millimeters [8.60 inches])

Processor

Support for an Intel® processor in the LGA775 package

Main Memory

Two 184-pin, 2.5 V SDRAM Dual Inline Memory Module (DIMM) sockets

 

400/333 MHz single channel DDR SDRAM interface

 

Designed to support up to 2 GB of system memory

 

 

Chipset

ATI RADEON* XPRESS 200

 

ATI RC410 Integrated Graphics Processor

 

ATI IXP 450 Southbridge

 

 

Graphics

ATI RADEON XPRESS 200 Graphics with support for external graphics via a PCI

 

Express* x16 connector

 

 

 

Audio

ATI RADEON XPRESS 200 Chipset

 

High Definition Audio interface

 

Realtek* codec

 

 

 

Expansion Capabilities

Two PCI bus add-in card connectors

 

One PCI Express x16 connector

 

One PCI Express x1 connector

Peripheral Interfaces

Eight USB 2.0 ports

 

 

Four ports routed to the back panel

 

 

Four ports routed to two USB headers

 

Four Serial ATA (SATA) channels (1.5 Gb/s)

 

Two IDE interfaces with ATA-133 support (four devices)

 

One VGA connector

 

One diskette drive interface

 

One parallel port

 

One serial port

 

PS/2* keyboard and mouse ports

 

 

 

BIOS

AwardBIOS*

 

 

 

Power Management

Support for Advanced Configuration and Power Interface (ACPI)

 

Suspend to RAM (STR)

 

Wake on USB, PCI, PCI Express, PS/2, LAN, and front panel

 

 

 

Related Links:

For more information about desktop board D101GGC, including the Technical Product Specification (TPS), BIOS updates, and device drivers, go to:

http://support.intel.com/support/motherboards/desktop/

9

Image 9
Contents D101GGC FCC Declaration of Conformity Revision Revision History DateCanadian Department of Communications Compliance Statement DisclaimerIntended Uses Intended AudienceInformation Layout ConventionsTerminology Box ContentsContents Figures Tables ContentsViii Form Factor Feature SummarySupported Operating Systems Desktop Board Components Desktop Board FeaturesLabel Description Desktop Boards D101GGC ComponentsPlatform Compatibility Guide Power Supply Requirements Power Supply RequirementsProcessor Main MemoryATI RADEON* Xpress 200 Chipset Graphics SubsystemAudio Subsystem Input/Output I/O Controller RJ-45 LAN Connector LEDsLAN Subsystem LAN Subsystem SoftwareRJ-45 10/100 Ethernet LAN Connector LEDs Hi-Speed USB 2.0 SupportLED State Indicates PCI and PCI Express Auto Configuration Serial ATA and IDE Auto ConfigurationEnhanced IDE Interface Serial ATASecurity Passwords Power Management FeaturesPower Connectors Chassis IntrusionSuspend to RAM Instantly Available PC Technology Fan ConnectorsWake from USB Wake from PS/2 Keyboard/MousePME# Wakeup Support Battery SpeakerReal-Time Clock Intel Desktop Board D101GGC Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldDesktop Board D101GGC Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorRemove the Protective Socket Cover Install Processor Installing the Processor Fan Heat Sink Connecting the Processor Fan Heat Sink CableRemoving the Processor Installing DIMMs Installing and Removing MemoryDimm Removing DIMMs Installing and Removing a PCI Express* x16 Card Installing a PCI Express x16 CardRemoving the PCI Express x16 Card Connecting the IDE Cable Connecting the IDE CableConnecting the Serial ATA Cable Connecting the Serial ATA Sata CableItem Description Connecting Internal HeadersPin Signal Name AC ’97 Audio Header Signal NamesConnecting the Front Panel Header Connecting Hi-Speed USB 2.0 HeadersHi-Speed USB 2.0 Header Signal Names Front Panel Header Signal NamesMulti-Channel Analog Audio Connecting Fan Cables Connecting Fan and Power CablesConnecting 2x12 Power Supply Cables Connecting Power CablesLocation of Other Connectors on Desktop Board D101GGC Other ConnectorsLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Precaution Replacing the BatteryAvvertimento Awas Oсторога Removing the Battery Place Battery Marking Safety RegulationsSafety Regulations Regulation TitleEuropean Union Declaration of Conformity Statement Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Français Lead Free Desktop Board EMC RegulationsLead Free Description EMC RegulationsEnsure System EMC Compliance Product Certifications Board-Level Certification MarkingsProduct Certification Markings Europe Chassis and Component Certifications

D101GGC specifications

The Intel D101GGC is a micro ATX motherboard that caters primarily to entry-level computing needs, making it an excellent choice for budget-conscious users or those building basic systems. Designed to support Intel Core 2 Duo processors, the D101GGC offers a reliable platform for everyday tasks, multimedia applications, and light gaming.

One of the key features of the D101GGC is its support for Intel's 945GC chipset, which provides a solid foundation for performance. This chipset allows for efficient handling of various computing tasks while ensuring compatibility with a broad range of Intel processors. The motherboard supports up to 4 GB of DDR2 RAM across two DIMM slots, enhancing multitasking capabilities and overall performance.

When it comes to graphics, the D101GGC includes integrated Intel Graphics Media Accelerator 950, which provides decent visual quality for standard applications and light gaming. Additionally, the motherboard features a PCI Express x16 slot, allowing users to upgrade to a dedicated graphics card for improved performance in games and graphic-intensive applications.

Storage capabilities are another highlight of the D101GGC, as it supports up to four SATA II connections for modern hard drives and SSDs. This enables users to take advantage of faster data transfer speeds for improved system responsiveness and quicker load times. Legacy support is also present with an IDE connector for older devices, ensuring compatibility with a variety of storage solutions.

Connectivity options on the D101GGC include a range of USB ports, including USB 2.0, which allows users to connect multiple peripherals with ease. The motherboard also includes integrated Ethernet capabilities, facilitating easy networking without requiring additional hardware.

In terms of form factor, the micro ATX design of the D101GGC makes it suitable for a variety of cases, allowing for flexible installations. Its layout is user-friendly, facilitating straightforward assembly and upgrades.

Overall, the Intel D101GGC is a reliable and cost-effective choice for users seeking to build a basic computing system. Its combination of essential features, support for modern technologies, and upgrade potential make it an ideal option for budget builds, casual users, and those looking for a solid foundation for everyday computing tasks.