Product Description
1.2Legacy Considerations
This board differs from other Intel® Desktop Board products, with specific changes including (but not limited to) the following:
•No parallel port
•The location of the floppy drive connector has moved
•No serial port on the back panel
•The serial port header is located between the memory sockets and may require a specialized chassis or cabling solution to use
1.3Online Support
To find information about… | Visit this World Wide Web site: |
|
|
Intel Desktop Board DG33BU | http://www.intel.com/products/motherboard/DG33BU/index.htm |
|
|
Desktop Board Support | http://support.intel.com/support/motherboards/desktop |
|
|
Available configurations for the | http://www.intel.com/products/motherboard/DG33BU/index.htm |
Desktop Board DG33BU |
|
|
|
Supported processors | http://www.intel.com/go/findcpu |
|
|
Chipset information | http://www.intel.com/products/desktop/chipsets/index.htm |
|
|
BIOS and driver updates | http://downloadcenter.intel.com |
|
|
Tested Memory | http://support.intel.com/support/motherboards/desktop/sb/CS- |
| 025414.htm |
|
|
1.4Processor
The board is designed to support the following processors:
•Intel Core 2 Quad processor in an LGA775 socket with a 1066 MHz system bus
•Intel Core 2 Duo processor in an LGA775 socket with a 1066 or 800 MHz system bus
•Intel Pentium
•Intel Celeron processor in an LGA775 socket with an 800 MHz system bus
Other processors may be supported in the future. This board is designed to support processors with a maximum wattage of 95 W. The processors listed above are only supported when falling within the wattage requirements of the DG33BU board. See the Intel web site listed below for the most
For information about… | Refer to: |
|
|
Supported processors | http://www.intel.com/go/findcpu |
|
|
CAUTION
Use only the processors listed on the web site above. Use of unsupported processors can damage the board, the processor, and the power supply.
15