![](/images/new-backgrounds/1123579/123579105x1.webp)
Technical Reference
Table 16 lists the settings for the jumper.
Table 16. BIOS Setup Configuration Jumper Settings
Function/Mode | Jumper Setting | Configuration |
|
|
|
Normal | The BIOS uses current configuration information and passwords | |
|
| for booting. |
|
|
|
Configure | After the POST runs, Setup runs automatically. The maintenance | |
|
| menu is displayed. |
|
| Note that this Configure mode is the only way to clear the |
|
| BIOS/CMOS settings. Press F9 (restore defaults) while in |
|
| Configure mode to restore the BIOS/CMOS settings to their |
|
| default values. |
|
|
|
Recovery | None | The BIOS attempts to recover the BIOS configuration. A |
|
| recovery CD or flash drive is required. |
|
|
|
2.4Intel® Management Engine BIOS Extension (Intel® MEBX) Reset Header
The Intel® MEBX reset header (see Figure 13) allows you to reset the Intel ME configuration to the factory defaults. Momentarily shorting pins 1 and 2 with a jumper (not supplied) will accomplish the following:
•Return all Intel ME parameters to their default values.
•Reset the Intel MEBX password to the default value (admin).
CAUTION
Always turn off the power and unplug the power cord from the computer before installing an MEBX reset jumper. The jumper must be removed before reapplying power. The system must be allowed to reach end of POST before reset is complete. Otherwise, the board could be damaged.
NOTE
After using the MEBX Reset, a “CMOS battery failure” warning will occur during the next POST. This is expected and does not indicate a component failure.
53