Intel Desktop Board DX58SO2 Product Guide
Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating.
Table 3. LAN Connector LEDs
LED | LED Color | LED State | Indicates |
|
|
|
|
A | Green | Off | LAN link is not established |
|
|
|
|
|
| On | LAN link is established |
|
|
|
|
|
| Blinking | LAN activity is occurring |
|
|
|
|
B | N/A | Off | 10 Mb/s data rate |
|
|
|
|
| Green | On | 100 Mb/s data rate |
|
|
|
|
| Yellow | On | 1000 Mb/s data rate |
|
|
|
|
C | Green | Off | LAN link is not established |
|
|
|
|
|
| On | LAN link is established |
|
|
|
|
|
| Blinking | LAN activity is occurring |
|
|
|
|
D | N/A | Off | 10 Mb/s data rate |
|
|
|
|
| Green | On | 100 Mb/s data rate |
|
|
|
|
| Yellow | On | 1000 Mb/s data rate |
|
|
|
|
USB 2.0 Support
The Desktop Board supports USB 3.0 and USB 2.0. USB 3.0 is supported via two USB 3.0 ports (blue) on the back panel. USB 3.0 ports are backward compatible with USB 2.0 and USB 1.1 devices. The USB 3.0 ports are SuperSpeed,
There are 12 USB 2.0 ports (six ports routed to back panel connectors (black) and six ports routed to three onboard headers). The USB 2.0 ports are
Serial ATA
The board provides two onboard 6.0 Gb/s Serial ATA (SATA) channels (blue connectors) and six onboard 3.0 Gb/s SATA channels (black connectors).
The onboard Serial ATA channels provided by ICH10R support the following RAID (Redundant Array of Independent Drives) levels:
•RAID 0 - data striping
•RAID 1 - data mirroring
•RAID 0+1 (or RAID 10) - data striping and data mirroring
•RAID 5 - distributed parity
18