Regulatory Compliance
EMC Regulations
Intel Desktop Board DX58SO2 complies with the EMC regulations stated in Table 20 when correctly installed in a compatible host system.
Table 20. EMC Regulations
Regulation | Title |
|
|
FCC 47 CFR Part 15, | Title 47 of the Code of Federal Regulations, Part 15, Subpart B, |
Subpart B | Radio Frequency Devices. (USA) |
|
|
| (Canada) |
|
|
EN55022 | Limits and methods of measurement of Radio Interference |
| Characteristics of Information Technology Equipment. (European |
| Union) |
|
|
EN55024 | Information Technology Equipment – Immunity Characteristics |
| Limits and methods of measurement. (European Union) |
|
|
EN55022 | Australian Communications Authority, Standard for |
| Electromagnetic Compatibility. (Australia and New Zealand) |
|
|
CISPR 22 | Limits and methods of measurement of Radio Disturbance |
| Characteristics of Information Technology Equipment. |
| (International) |
|
|
CISPR 24 | Information Technology Equipment – Immunity Characteristics – |
| Limits and Methods of Measurement. (International) |
|
|
VCCI | Voluntary Control for Interference by Information Technology |
| Equipment. (Japan) |
|
|
Korean Communications Commission – Framework Act on | |
| Telecommunications and Radio Waves Act. (South Korea) |
|
|
CNS 13438 | Bureau of Standards, Metrology and Inspection. (Taiwan) |
|
|
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
85