Intel BLKDH57JG manual Hardware Management, Security Passwords

Page 21

Desktop Board Features

Security Passwords

The BIOS includes security features that restrict whether the BIOS Setup program can be accessed and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup and for booting the computer, with the following restrictions:

The supervisor password gives unrestricted access to view and change all Setup options. If only the supervisor password is set, pressing <Enter> at the password prompt of Setup gives the user restricted access to Setup.

If both the supervisor and user passwords are set, you must enter either the supervisor password or the user password to access Setup. Setup options are then available for viewing and changing depending on whether the supervisor or user password was entered.

Setting a user password restricts who can boot the computer. The password prompt is displayed before the computer is booted. If only the supervisor password is set, the computer boots without asking for a password. If both passwords are set, you can enter either password to boot the computer.

For instructions on resetting the password, go to Clearing Passwords on page 52.

Hardware Management

The hardware management features of Intel Desktop Board DH57JG enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features including the following:

Fan speed monitoring and control

Thermal and voltage monitoring

Chassis intrusion detection

Hardware Monitoring and Fan Speed Control

The features of the hardware monitoring and fan speed control include:

Intel Quiet System Technology, delivering acoustically-optimized thermal management

Thermal sensors in the processor and Intel H57 PCH, as well as near the processor voltage regulators and system memory

NOTE

The minimum thermal reporting threshold for the Intel H57 PCH is 59 °C. The PCH’s thermal sensor will display 59 °C until the temperature rises above this point.

Monitoring of system voltages to detect levels above or below acceptable values

Thermally monitored closed-loop fan control for all fans that can adjust fan speed as needed

21

Image 21
Contents Intel Desktop Board DH57JG Product Guide FCC Declaration of Conformity Revision HistoryCanadian Department of Communications Compliance Statement DisclaimerIntended Audience PrefaceUse Only for Intended Applications Document OrganizationTerminology Intel Desktop Board DH57JG Product GuideTerm Description Contents Error Messages and Indicators Regulatory Compliance ContentsTables Desktop Board Features Feature SummaryProcessor Interfaces PeripheralLAN Support Instantly AvailableSupported Operating Systems Desktop Board FeaturesIntel Desktop Board DH57JG Components Desktop Board ComponentsLabel Description Online Support ProcessorMain Memory Intel H57 Express ChipsetIntegrated Graphics Graphics SubsystemIntel HD Graphics High-Definition Multimedia Interface* HdmiDigital Visual Interface DVI-I PCI Express* x16 GraphicsVGA Displays DVI Port Status ConditionsAudio Jack Retasking Support Audio SubsystemLAN Subsystem USB 2.0 SupportLED Color LED State Indicates PCI*/PCI Express Auto Configuration Serial ATA Auto ConfigurationSerial ATA Support ExpandabilitySecurity Passwords Hardware ManagementHardware Monitoring and Fan Speed Control Fan Monitoring Power ManagementChassis Intrusion Software SupportFan Headers LAN Wake CapabilitiesInstantly Available PC Technology Location of the Standby Power Indicator +5 V Standby Power Indicator LEDSpeaker PCI Express WAKE# Signal Wake-up SupportEnergy STAR*, e-Standby, and ErP Compliance Wake from USBReal-Time Clock Subsystem Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldIntel Desktop Board DH57JG Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Socket Cover Remove the Processor from the Protective Cover Lower the Load Plate Connecting the Processor Fan Heat Sink Cable Installing a Processor Fan Heat SinkRemoving the Processor Installing and Removing System MemoryUse DDR3 DIMMs Installing DIMMsInstalling a Dimm Installing and Removing PCI Express x16 Graphics Cards Installing a PCI Express x16 Graphics CardRemoving DIMMs Installing a PCI Express x16 Graphics Card Removing a PCI Express x16 Graphics Card Removing a PCI Express x16 Graphics CardConnecting a Serial ATA Cable Connecting Serial ATA Sata CablesInternal Headers Connecting to the Internal HeadersFront Panel Audio Signal Names for Intel HD Audio Alternate Front Panel Power LED HeaderFront Panel Audio Header Signal Names for AC ’97 Audio Alternate Front Panel Power LED Header Signal NamesUSB 2.0 Header Signal Names Front Panel Header Signal NamesFront Panel Header Front Panel USB 2.0 HeadersChassis Intrusion Header Serial HeaderPdif Header Back Panel Audio Connectors Connecting to the Audio SystemConnecting a Chassis Fan Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Connecting Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Précaution Replacing the BatteryViktigt Προσοχή Внимание Installing and Replacing Desktop Board Components Removing the Battery Updating the Bios with the Intel Express Bios Update Utility Updating the BiosObtaining the Bios Update File Updating the Bios Updating the Bios with the ISO Image Bios Update FileRecovering the Bios Updating the Bios with the Iflash Memory Update UtilityBios Error Codes Error Messages and IndicatorsBios Beep Codes Type Pattern Frequency/CommentsFront-panel Power LED Blink Codes Bios Error MessagesBios Error Messages Error Message ExplanationPlace Battery Marking Safety StandardsSafety Standards Regulatory ComplianceEuropean Union Declaration of Conformity Statement Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Español DeutschFrançais MalayPortuguese RussianTürkçe Lead-free 2LI/Pb-free 2LI Board EU RoHS Restriction of Hazardous Substances RoHSLead-Free Second Level Interconnect Marks Description MarkChina RoHS Environmentally Friendly Use Period Mark China RoHSRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Product Certifications Board-Level Certification MarkingsProduct Certification Markings Europe Chassis and Component CertificationsIntel Desktop Board DH57JG Product Guide

BLKDH57JG specifications

The Intel BLKDH57JG is a versatile micro ATX motherboard that is designed for Intel's second-generation Core processors. Aimed at both performance enthusiasts and casual users, this board supports the LGA 1156 socket and is built to deliver a robust computing experience.

One of the standout features of the BLKDH57JG is its support for dual-channel DDR3 memory, with a maximum capacity of 16 GB. This capability ensures that users can enjoy a significant boost in performance when running memory-intensive applications or multitasking. The motherboard supports memory speeds of up to 1600 MHz, allowing for optimal data transfer rates that enhance overall system performance.

In terms of expandability, the Intel BLKDH57JG is equipped with a range of expansion slots. It features a PCI Express 2.0 x16 slot, which is ideal for high-performance graphics cards, as well as multiple PCI Express x1 and PCI slots for additional expansion cards. This makes it suitable for gaming, video editing, and other demanding applications.

Storage options are plentiful with the BLKDH57JG, which includes six SATA II ports that support RAID configurations. This ensures that users can set up multiple drives for improved performance or data redundancy, making it easier to manage large volumes of data safely. The board also features Intel Rapid Storage Technology, which helps enhance the performance and reliability of storage devices connected to the motherboard.

Connectivity is another strong point for the BLKDH57JG. The motherboard supports Intel's latest technologies including USB 3.0, providing faster data transfer speeds for compatible devices. Additionally, it comes with integrated high-definition audio, ensuring a superior sound experience without the need for an additional sound card.

Onboard networking capabilities include Gigabit Ethernet support, offering users fast and stable internet connectivity. The inclusion of solid capacitors and advanced circuitry ensures durability and stability, making the motherboard a reliable choice for various computing needs.

Overall, the Intel BLKDH57JG combines excellent performance, expandability, and connectivity in a compact ATX form factor, making it an excellent choice for anyone looking to build a capable and reliable system.