Intel BLKDH57JG manual Preface, Intended Audience, Use Only for Intended Applications, Conventions

Page 3

Preface

This Product Guide gives information about board layout, component installation, BIOS update, and regulatory requirements for Intel® Desktop Board DH57JG.

Intended Audience

The Product Guide is intended for technically qualified personnel. It is not intended for general audiences.

Use Only for Intended Applications

All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel.

Document Organization

The chapters in this Product Guide are arranged as follows:

1Desktop Board Features: a summary of product features

2Installing and Replacing Desktop Board Components: instructions on how to install the Desktop Board and other hardware components

3Updating the BIOS: instructions on how to update the BIOS

AError Messages and Indicators: information about BIOS error messages and beep codes

BRegulatory Compliance: describes the board’s adherence to safety standards and EMC regulations and its product certifications

Conventions

The following conventions are used in this manual:

CAUTION

Cautions warn the user about how to prevent damage to hardware or loss of data.

NOTE

Notes call attention to important information.

iii

Image 3
Contents Intel Desktop Board DH57JG Product Guide Disclaimer Revision HistoryFCC Declaration of Conformity Canadian Department of Communications Compliance StatementDocument Organization PrefaceIntended Audience Use Only for Intended ApplicationsTerminology Intel Desktop Board DH57JG Product GuideTerm Description Contents Error Messages and Indicators Regulatory Compliance ContentsTables Desktop Board Features Feature SummaryProcessor Instantly Available PeripheralInterfaces LAN SupportSupported Operating Systems Desktop Board FeaturesIntel Desktop Board DH57JG Components Desktop Board ComponentsLabel Description Online Support ProcessorMain Memory Intel H57 Express ChipsetHigh-Definition Multimedia Interface* Hdmi Graphics SubsystemIntegrated Graphics Intel HD GraphicsDVI Port Status Conditions PCI Express* x16 GraphicsDigital Visual Interface DVI-I VGA DisplaysAudio Jack Retasking Support Audio SubsystemLAN Subsystem USB 2.0 SupportLED Color LED State Indicates Expandability Serial ATA Auto ConfigurationPCI*/PCI Express Auto Configuration Serial ATA SupportSecurity Passwords Hardware ManagementHardware Monitoring and Fan Speed Control Software Support Power ManagementFan Monitoring Chassis IntrusionFan Headers LAN Wake CapabilitiesInstantly Available PC Technology Location of the Standby Power Indicator +5 V Standby Power Indicator LEDWake from USB PCI Express WAKE# Signal Wake-up SupportSpeaker Energy STAR*, e-Standby, and ErP ComplianceReal-Time Clock Subsystem Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldIntel Desktop Board DH57JG Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Socket Cover Remove the Processor from the Protective Cover Lower the Load Plate Connecting the Processor Fan Heat Sink Cable Installing a Processor Fan Heat SinkRemoving the Processor Installing and Removing System MemoryUse DDR3 DIMMs Installing DIMMsInstalling a Dimm Installing and Removing PCI Express x16 Graphics Cards Installing a PCI Express x16 Graphics CardRemoving DIMMs Installing a PCI Express x16 Graphics Card Removing a PCI Express x16 Graphics Card Removing a PCI Express x16 Graphics CardConnecting a Serial ATA Cable Connecting Serial ATA Sata CablesInternal Headers Connecting to the Internal HeadersAlternate Front Panel Power LED Header Signal Names Alternate Front Panel Power LED HeaderFront Panel Audio Signal Names for Intel HD Audio Front Panel Audio Header Signal Names for AC ’97 AudioFront Panel USB 2.0 Headers Front Panel Header Signal NamesUSB 2.0 Header Signal Names Front Panel HeaderChassis Intrusion Header Serial HeaderPdif Header Back Panel Audio Connectors Connecting to the Audio SystemConnecting a Chassis Fan Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Connecting Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Précaution Replacing the BatteryViktigt Προσοχή Внимание Installing and Replacing Desktop Board Components Removing the Battery Updating the Bios with the Intel Express Bios Update Utility Updating the BiosObtaining the Bios Update File Updating the Bios Updating the Bios with the ISO Image Bios Update FileRecovering the Bios Updating the Bios with the Iflash Memory Update UtilityType Pattern Frequency/Comments Error Messages and IndicatorsBios Error Codes Bios Beep CodesError Message Explanation Bios Error MessagesFront-panel Power LED Blink Codes Bios Error MessagesRegulatory Compliance Safety StandardsPlace Battery Marking Safety StandardsEuropean Union Declaration of Conformity Statement Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Malay DeutschEspañol FrançaisPortuguese RussianTürkçe Lead-free 2LI/Pb-free 2LI Board Description Mark Restriction of Hazardous Substances RoHSEU RoHS Lead-Free Second Level Interconnect MarksChina RoHS Environmentally Friendly Use Period Mark China RoHSRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Product Certifications Board-Level Certification MarkingsProduct Certification Markings Europe Chassis and Component CertificationsIntel Desktop Board DH57JG Product Guide

BLKDH57JG specifications

The Intel BLKDH57JG is a versatile micro ATX motherboard that is designed for Intel's second-generation Core processors. Aimed at both performance enthusiasts and casual users, this board supports the LGA 1156 socket and is built to deliver a robust computing experience.

One of the standout features of the BLKDH57JG is its support for dual-channel DDR3 memory, with a maximum capacity of 16 GB. This capability ensures that users can enjoy a significant boost in performance when running memory-intensive applications or multitasking. The motherboard supports memory speeds of up to 1600 MHz, allowing for optimal data transfer rates that enhance overall system performance.

In terms of expandability, the Intel BLKDH57JG is equipped with a range of expansion slots. It features a PCI Express 2.0 x16 slot, which is ideal for high-performance graphics cards, as well as multiple PCI Express x1 and PCI slots for additional expansion cards. This makes it suitable for gaming, video editing, and other demanding applications.

Storage options are plentiful with the BLKDH57JG, which includes six SATA II ports that support RAID configurations. This ensures that users can set up multiple drives for improved performance or data redundancy, making it easier to manage large volumes of data safely. The board also features Intel Rapid Storage Technology, which helps enhance the performance and reliability of storage devices connected to the motherboard.

Connectivity is another strong point for the BLKDH57JG. The motherboard supports Intel's latest technologies including USB 3.0, providing faster data transfer speeds for compatible devices. Additionally, it comes with integrated high-definition audio, ensuring a superior sound experience without the need for an additional sound card.

Onboard networking capabilities include Gigabit Ethernet support, offering users fast and stable internet connectivity. The inclusion of solid capacitors and advanced circuitry ensures durability and stability, making the motherboard a reliable choice for various computing needs.

Overall, the Intel BLKDH57JG combines excellent performance, expandability, and connectivity in a compact ATX form factor, making it an excellent choice for anyone looking to build a capable and reliable system.