ATC6430M MainboardChapter 3 Award BIOS Setup
Video Off Method This determines the manner in which the monitor is blanked.
V/H SYNC | This selection will cause the system to turn off the vertical and |
+ Blank | horizontal sync. ports and write blanks to the video buffer. |
Blank Screen | This option only writes blanks to the video buffer. |
DPMS | Initial of “Display Power Management Signaling”. |
|
|
Video off In Suspend This determines the manner in which the monitor is blanked.
Suspend Type Select the suspend type.
Stop Grant | Only CPU enters sleeping mode |
|
|
Full on Suspend | Both CPU and chipset enter sleeping mode |
|
|
MODEM Use IRQ This item determines the IRQ in which the MODEM can be used. The choice : 3,4,5,7,9,10,11,NA.
Suspend Mode When enabled and after the set time of system inactivity, all devices except the CPU will be shut off.
HDD Power Down When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active.
power will be off immediately. Delay 4 sec : when push the power button, it will enter suspend mode. We need to push the power button and hold it for 4 seconds to turn off the power.
PCI PME# Function With PCI card supporting PCI Power Management capability and this item setting to Enabled, the system can be waked up by PCI card.
PowerOn by Ring Enabled: when system is in suspend mode, it can be waked up by
modem. Disabled: it cannot be waked up by modem.
Resume by Alarm When Enabled, two additional lines will be added to the screen :Date (of Month) Alarm; Time (hh:mm:ss) Alarm to let user set the desired date and time. After power off, the system will automatically power on at the specified date and time.
Reload Global Timer Events When enabled, an event occurring on each device listed below restarts the global time for Standby mode. IRQ
31