Desktop Board Features
Back to BIOS Button
The back panel Back to BIOS button (Figure 4, A) duplicates the functionality of the BIOS configuration jumper with the following exceptions:
•It can only be used to force the board to power on to the BIOS Maintenance Menu using default values but it will retain all previously saved changes.
•It cannot be used to override passwords set in the BIOS.
•It cannot be used to invoke BIOS recovery mode.
The button glows red when it is activated.
NOTE
Using the Back to BIOS button does not set the board to the factory BIOS defaults. To restore settings to the factory defaults, use the <F9> key once BIOS setup mode is active.
Figure 4. Location of the Back to BIOS Button
Hardware Management
The hardware management features of Intel Desktop Board DX79TO enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features including the following:
•Fan speed monitoring and control
•Thermal and voltage monitoring
•Chassis intrusion detection
Hardware Monitoring and Fan Speed Control
Hardware monitoring and fan speed control are based on the Nuvoton* Legacy I/O Controller, which provides the following:
•Processor and system ambient temperature monitoring
•Monitoring of power supply voltages to detect levels above and below acceptable values
•Chassis fan speed monitoring
•SMBus interface
21