Intel BLKDX79TO manual Energy STAR*, e-Standby, and ErP Compliance, Europe, United States, Canada

Page 85

Regulatory Compliance

Chassis- and Component-Level Certifications

Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring, and cables; are components certified for the country or market where used. Agency certification marks on the product are proof of certification. Typical product certifications include:

In Europe

The CE mark indicates compliance with all applicable European requirements. If the chassis and other components are not properly CE marked, a supplier’s Declaration of Conformity statement to the European EMC directive, Low Voltage directive (as applicable), and ROHS directive, should be obtained. Additionally, other directives, such as the Radio and Telecommunications Terminal Equipment (R&TTE) directive may also apply depending on product features.

In the United States

A certification mark by a Nationally Recognized Testing Laboratory (NRTL) such as UL, CSA, or ETL signifies compliance with safety requirements. Wiring and cables must also be UL listed or recognized and suitable for the intended use. The FCC Class B logo for home or office use signifies compliance with electromagnetic interference (EMI) requirements.

In Canada

A nationally recognized certification mark such as CSA or cUL signifies compliance with safety requirements. The Industry Canada statement on page 82 of this product guide demonstrates compliance with Canadian EMC regulations.

ENERGY STAR*, e-Standby, and ErP Compliance

The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of the new requirements.

Intel Desktop Board DX79TO meets the following program requirements in an adequate system configuration, including appropriate selection of an efficient power supply:

Energy Star v5.0, category D

EPEAT

Korea e-Standby

European Union Energy-related Products Directive 2009 (ErP)

For information about ENERGY STAR requirements and recommended configurations, go to http://www.intel.com/go/energystar.

85

Image 85
Contents Intel Desktop Board DX79TO Product Guide Disclaimer Revision HistoryIntended Audience PrefaceUse Only for Intended Applications Document OrganizationIntel Desktop Board DX79TO Product Guide TerminologyTerm Description Contents Error Messages and Indicators Regulatory Compliance ContentsTables Feature Summary Desktop Board FeaturesPeripheral Power ManagementInterfaces LAN SupportSupported Operating Systems Desktop Board FeaturesIntel Desktop Board DX79TO Components Desktop Board ComponentsLabel Description Online Support ProcessorSystem Memory Memory Channel and Dimm Configuration Memory ConfigurationsUSB Support Intel X79 Express ChipsetSerial ATA USBLAN Subsystem Audio SubsystemExpandability Legacy I/OLED Color LED State Indicates PCI and PCI Express* Auto Configuration Serial ATA and IDE Auto ConfigurationSecurity Passwords Hardware Management Back to Bios ButtonHardware Monitoring and Fan Speed Control Chassis Intrusion Power ManagementSoftware Support Hardware SupportFan Headers +5 V Standby Power Indicator Wake from USB Onboard System Control SwitchesReset Switch Power SwitchLocation of the Initialization/Status LEDs System Initialization/ Status LEDsSystem Initialization LEDs System Initialization LEDsItem/Callout Activity Color DescriptionSpeaker Trusted Platform Module TPMStatus LEDs Status LEDsReal-Time Clock BatteryBefore You Begin Installing and Replacing Desktop Board ComponentsPrevent Power Supply Overload Installation PrecautionsObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldIntel Desktop Board DX79TO Mounting Screw Hole Locations Installing the Desktop BoardUnlatch the Socket Levers Installing a ProcessorOpen the Load Plate Install the Processor Close the Load Plate Installing a Processor Fan Heat Sink Installing DIMMs Installing and Removing MemoryInstalling a Dimm Installing PCI Express x16 Graphics Cards Installing and Removing PCI Express x16 Add-in CardsRemoving DIMMs Removing a PCI Express x16 Add-in Card Installing a PCI Express x16 CardRemoving a PCI Express x16 Card Installing Linked PCI Express x16 Graphics CardsInstalling Linked PCI Express Graphics Cards Connecting the Serial ATA Cables Connecting Sata CablesInternal Headers Connecting to the Internal Headers and ConnectorsChassis Intrusion Header Front Panel Audio HeaderIeee 1394a Header Back Panel CIR Header Emitter Output Header Signal Names Front Panel CIR Receiver Input Header Signal NamesPin Signal Name Ground Consumer IR CIR HeadersFront Panel Header Signal Names USB 2.0 Header Signal NamesUSB 2.0 Headers Front Panel HeaderAlternate Front Panel Power LED Header Connecting to the Audio SystemAlternate Front Panel Power LED Header Signal Names Pin Description In/OutConnecting Chassis Fan Cables Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Connecting Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperJumper Settings for the Bios Setup Program Modes Clearing PasswordsMode Description Précaution Replacing the BatteryVaro Προσοχή Внимание Intel Desktop Board DX79TO Product Guide Removing the Battery Intel Desktop Board DX79TO Product Guide Updating the Bios with the Intel Express Bios Update Utility Updating the BiosUpdating the Bios with the Intel Flash Memory Update Utility Updating the Bios Using the F7 Function KeyUpdating the Bios Recovering the BiosIntel Desktop Board DX79TO Product Guide Configuring the Bios Configuring for RAID Using Intel Rapid Storage TechnologyGo to Configuration Sata Drives Creating Your RAID SetSetting Up a RAID Ready System Bios Error Codes Error Messages and IndicatorsBios Beep Codes Front-panel Power LED Blink CodesBios Error Messages Bios Error MessagesError Message Explanation Port 80h Post Codes Error Messages and IndicatorsPort 80h Post Codes PEI Phase Before MRCPost Code Description Acpi S States MEC Memory DetectionBoot Device Selection BDS PEIMs/RecoveryRuntime Phase/EFI Operating System Boot CPU Initialization PEI, DXE, SMMIntel Desktop Board DX79TO Product Guide Battery Caution Safety StandardsSafety Standards Regulatory ComplianceEuropean Union Declaration of Conformity Statement Recycling Considerations Product Ecology StatementsRegulatory Compliance Español DeutschFrançais MalayRussian PortugueseTürkçe China RoHS FCC Declaration of Conformity EMC RegulationsEMC Regulations Japan Vcci Statement Canadian Department of Communications Compliance StatementEnsure Electromagnetic Compatibility EMC Compliance Korea Class B StatementBoard-Level Certifications Product CertificationsRegulatory Compliance Marks Description MarkChassis- and Component-Level Certifications Energy STAR*, e-Standby, and ErP ComplianceEurope United StatesIntel Desktop Board DX79TO Product Guide