Intel SE7221BA1-E manual Server Board Features, Feature Description

Page 12

Server Board Features

1 Server Board Features

This chapter briefly describes the main features of the Intel® Entry Server Board SE7221BA1-E. Provided is a photograph of the product, a list of the server board features, and diagrams showing the location of important components and connections on the server board.

The Intel® Entry Server Board SE7221BA1-E is shown in the following picture.

Figure 1. Intel® Entry Server Board SE7221BA1-E

Table 1 summarizes the major features of the server board.

Table 1. Server Board Features

Feature

Description

 

 

Processors

Support for an Intel® Pentium® 4 processor in the LGA775 package with 800

 

MHz or 533 MHz front side bus

 

 

Memory

Four 240-pin, 1.8 V SDRAM Dual Inline Memory Module (DIMM) sockets

 

533/400 MHz single or dual channel DDR2 SDRAM interface

 

Designed to support up to 4 GB of system memory

 

NOTE: System resources (such as PCI and PCI Express*) require physical

 

memory address locations that reduce available memory addresses above 3

 

GB. This may result in less than 4 GB of memory being available to the

 

operating system and applications. For the latest list of tested memory, refer

 

to the Intel World Wide Web site at:

 

http://support.Intel.com/support/motherboards/server/SE7221BA1-E/

 

 

Chipset

Intel® E7221 Chipset consisting of:

 

Intel® E7221 Graphics Memory Controller Hub (MCH with integrated graphics)

 

Intel® 82801FR I/O Controller Hub (ICH6-R)

 

 

Peripheral Interfaces

Up to eight USB 2.0 ports

 

Four ports routed to the back panel

 

Four ports routed to two USB headers

Intel® Entry Server Board SE7221BA1-E User Guide

1

Image 12
Contents Intel Entry Server Board SE7221BA1-E User Guide Disclaimer Product Accessories PrefaceAbout this Manual Manual OrganizationServer Board Features Additional Information and SoftwareSafety Information Safety Cautions 重要安全指导 Avvertenza Italiano Contents Intel Server Issue Report Form Regulatory and Certification InformationFigures TablesServer Board Features Feature DescriptionServer Board Features Description LANConnector and Component Locations E F G H CC AA EE DD BB Z YBack Panel Connectors LED Color LED State DescriptionHardware Requirements ProcessorMemory Power Supply Hardware Installations and Upgrades Installation PrecautionsHardware Installations and Upgrades Before You BeginInstalling and Removing Memory Guidelines for Dual Channel Memory ConfigurationTools and Supplies Needed Channel aInstalling DIMMs Use DDR2 DIMMsInstalling a Dimm Removing DIMMsInstalling or Replacing the Processor Installing a ProcessorLift the load plate. Do not touch the socket contacts Installing the Processor Fan Heat Sink Remove the Processor from the Protective Processor CoverInstalling and Removing a PCI Express* x8 Card Connecting the Processor Fan Heat Sink CableInstalling a PCI Express* x8 Card Removing the ProcessorReplacing the Backup Battery Removing the PCI Express* x8 CardPrécaution Varo Προσοχή Ettevaatust Attenzjoni Upozornenie Using the Bios Setup Utility Setting the Bios Configuration Jumper BlockClearing Passwords Server UtilitiesUpdating the Bios Updating the Bios with the Iflash Memory Update UtilityObtaining the Bios Update File Updating the Bios Recovering the BiosServer Utilities Troubleshooting Resetting the SystemProblems following Initial System Installation First Steps ChecklistHardware Diagnostic Testing Verifying Proper Operation of Key System LightsSpecific Problems and Corrective Actions Power Light Does Not LightConfirming Loading of the Operating System No Characters Appear on Screen Characters Are Distorted or IncorrectSystem Cooling Fans Do Not Rotate Properly Diskette Drive Activity Light Does Not LightCD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light Problems with Network System Boots when Installing PCI CardCannot Connect to a Server Problems with Newly Installed Application Software Bootable CD-ROM Is Not Detected Devices are not Recognized under Device ManagerHard Drives are not Recognized LED InformationBios Post Beep Codes Bios Beep CodesBios Error Messages Error Message ExplanationTroubleshooting Regulatory and Certification Information Regulatory and Certification InformationCertifications / Registrations / Declarations Product Regulatory Compliance Markings Regulatory Compliance Country MarkingElectromagnetic Compatibility Notices Vcci Japan Cnca CCC-China Getting Help World Wide Web TelephoneLatin America Intel Server Issue Report Form Intel Server Issue Report FormChassis Model DIMM2A Vendor/part number Intel SC5200 Base Peripheral Card Or Peripheral Description Driver Base FW Rev# Revision Address P64 Segment C PCI-X 64/133P64 Segment B PCI-X 64/100 P32 Segment a PCI 32/33Complete Problem Description

SE7221BA1-E specifications

The Intel SE7221BA1-E is a dual processor server motherboard designed for enterprise-level performance and reliability. Tailored for Intel's Xeon processors, it falls within the category of server-class motherboards, making it a preferred choice for data centers and businesses that require robust computing capability.

One of the prominent features of the SE7221BA1-E is its support for Intel’s 64-bit architecture, which allows for the handling of large datasets and efficient multitasking. This motherboard accommodates two CPU sockets, specifically designed for Intel Xeon processors, enabling dual-processor configurations that significantly boost processing power and enhance performance for demanding applications.

Memory capacity is another critical characteristic of the SE7221BA1-E. It supports up to 16 GB of DDR2 RAM across its four DIMM slots. This substantial memory capability is essential for multiple applications running simultaneously, ensuring that the server can handle high workloads without lag or performance dips. The advanced ECC (Error-Correcting Code) support adds an extra layer of reliability, making it ideal for critical computing environments.

Storage capabilities are well addressed by this motherboard, which features multiple SATA and PATA ports. These interfaces allow for various storage configurations, accommodating a combination of hard drives and SSDs. RAID support enhances data redundancy and performance, which is crucial for enterprise storage solutions.

In terms of connectivity, the SE7221BA1-E includes integrated Gigabit Ethernet, ensuring fast network connections that are vital for server performance and data transfer. Moreover, the motherboard comes equipped with various expansion slots, including PCI Express and PCI, providing flexibility for further enhancements and the integration of additional components such as network cards or graphics processing units.

The Intel SE7221BA1-E motherboard is built on Intel's platform, making it compatible with a range of server technologies and management tools such as Intel Remote Management Module (RMM), enabling remote monitoring and management capabilities. This is particularly beneficial for IT administrators who need to ensure system stability and responsiveness without being physically present.

In conclusion, the Intel SE7221BA1-E motherboard is a tried-and-true solution for businesses looking to establish a solid server infrastructure. Its dual-processor support, substantial memory capacity, robust storage options, and advanced networking capabilities make it ideally suited for handling the demands of modern enterprise environments.