Intel AI5VG user manual PNP/PCI Configuration, PNP OS Installed, Resources Controlled by

Page 49

Chapter 7 LANDesk User Guide

6.7 PNP/PCI Configuration

This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.

ROM PCI/ISA BIOS

CHIPSET FEATURES SETUP

AWARD SOFTWARE INC.


	PNP OS Installed			: No	CPU to PCI Write Buffer		: Enabled
	Resources Controlled by			: Manual	PCI Dynamic Bursting		: Enabled
	Reset Configuration Data			: Disabled	PCI Master 0 WS Write		: Enabled
					PCI Delay Transaction		: Enabled
	IRQ-3	assigned	to	: Legacy ISA	PCI Master Read Prefetch		Enisabled
	IRQ-4	assigned	to	: Legacy ISA	PCI#2 Access #1 Retry		: Disabled
	IRQ-5	assigned	to	: PCI/ISA PnP	PCI Master 1 WS Write		: Enabled
	IRQ-7	assigned	to	: Legacy ISA	PCI Master 1 WS Read		: Disabled
	IRQ-9	assigned	to	: PCI/ISA PnP
	IRQ-10 assigned to			: PCI/ISA PnP	PCI IRQ Activated By		: Level
	IRQ-11 assigned to			: PCI/ISA PnP	PCI IDE IRQ Map To		: PCI-Auto
	IRQ-12 assigned to			: PCI/ISA PnP	Primary IDE INT#		: A
	IRQ-14 assigned to			: PCI/ISA PnP	Secondary IDE INT#		: B
	IRQ-15 assigned to			: PCI/ISA PnP
	DMA-0 assigned to			: PCI/ISA PnP
	DMA-1 assigned to			: PCI/ISA PnP	ESC : Quit	Ç È Å : Select Item
	DMA-3 assigned to			: PCI/ISA PnP	F1 : Help	PU/PD/+/- : Modify
	DMA-5 assigned to			: PCI/ISA PnP	F5 : Old Values	(Shift) F2 : Color
	DMA-6 assigned to			: PCI/ISA PnP	F6 : Load BIOS Defaults
	DMA-7	assigned	to	: PCI/ISA PnP	F7 : Load Setup Defaults

PNP OS Installed

This field allows you to specify if the operating system installed in your system is plug and play aware.

Note: Operating systems such as DOS, OS/2, and Windows 3.x do not use PnP.

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices automatically. However, this capability needs you to use a PnP operating system such as Windows 95. The default value is Manual.

Reset Configuration Data

This field allows you to determine whether to reset the configuration data or not. The default value is Disabled.

IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to

These fields allow you to determine the IRQ/DMA assigned to the ISA bus and is not available to any PCI slot.

AI5VG Pentium VP3 Baby AT Motherboard User’s Manual

45

Image 49

Contents AI5VG Page Contents Bios Configuration Introduction ChecklistL2 Cache Main ProcessorMain Memory Memory TypeOnboard Bus Mastering Eide CPU Temperature SensorWindows 95 Shut-Down AGP Support Accelerated Graphics PortHardware Description Layout of the AI5VG Motherboard L2 Cache Memory Processor and CPU Voltage8MB Bank0 Bank1 Total MemoryBank0 DIMM2 Bank1 DIMM1 Total Memory BiosDMI Desktop Management Interface ISA Plug and Play PnP ExtensionPower Management Onboard CPU Temperature SensorOnboard PCI Eide Onboard Multi-I/ODMA Channels I/O Port Address MapAddress Device Description Accelerated Graphics Port AGP Slot Interrupt Request Lines IRQLevel Function Hardware Settings Jumper Locations of the AI5VG Bus Clock Mutiplier SW11-8 CPU Frequency Selector For Intel Pentium CPUFor Cyrix 6x86, 6x86L CPU For Dual Voltage CPU Intel P55C, Cyrix 6x86L/MX, AMD K6 SW21-4 CPU Voltage SelectorK6-233 35∝ JP5 Clear Cmos Selection Installation Connector Location on the AI5VG J3 Pin # Description Wire Color I/O ConnectorsJ1, J4 AT Keyboard and PS/2 Mouse Connectors J2 ATX Power Supply ConnectorSignal Name Pin # J1 AT Keyboard Connector Pin # Signal NamePin # Signal Name J8 Floppy Drive ConnectorJ7, J6 Serial Ports RM/LCJ9 Primary IDE Connector Signal Name Pin # J9, J11 Eide ConnectorsJ11 Secondary IDE Connector Signal Name Pin # J15 IrDA Connector J10 Parallel Port Connector10 J5 USB Connector USB USB+12 J14 CPU Fan Power Connector 11 J13 Wake on LAN Connector13 J20 Front Bezel Connector J20 Pin # Signal Name Speaker Pins 1Power LED and Keylock Pins 11 ATX Power on Switch Pins 7Reset Switch Pins 9 Bios Configuration AGP LANDesk User Guide Bios Setup Bios IntroductionStandard Cmos Setup Date Standard Cmos SetupTime Mode for IDE HDD only AutoPrimary HDDs / Secondary HDDs LBADrive a / Drive B Floppy 3 Mode SupportVideo Halt OnVirus Warning Bios Features SetupCPU Internal Cache / External Cache Boot Sequence Quick Power On Self TestBoot Up Floppy Seek Boot Up NumLock StatusTypematic Delay Msec Typematic Rate SettingVideo Bios Shadow Typematic Rate Chars/SecChipset Features Setup System Bios Cacheable Video Bios CacheableCache Timing Memory Hole at 15MB AddrIRQ4 COM1 Power Management SetupDoze Mode HDD Power DownSuspend Mode PM Control by APMPM Events PNP OS Installed PNP/PCI ConfigurationReset Configuration Data Resources Controlled byPCI#2 Access #1 Retry PCI Delay TransactionCPU to PCI Write Buffer PCI Dynamic BurstingPCI IDE IRQ Map To Load Setup Defaults Load Bios DefaultsIDE HDD Block Mode IDE Prefetch ModeIntegrated Peripherals OnChip Primary/Secondary PCI IDEOnboard Parallel Mode Uart 2 ModeIDE Primary/Secondary Master/Slave Udma Onboard FDD ControllerSupervisor Password Supervisor / User PasswordHDD Low Level Format IDE HDD Auto DetectionExit Without Saving Save & Exit Setup