Intel US15W PCI Express* Slots, Soft Audio/Soft Modem, Crown Beach Supported Lvds Displays

Crown Beach Board

Table 4. Crown Beach Supported LVDS Displays

NOTE: The protective tape on top of the Crown Beach LVDS connector must be removed prior to installing an LVDS cable.

NOTE: VGA output is not directly supported. Customers can use PCI Express*-based discrete, external 3D graphics cards, or a third-party component available on an ADD2N card using the SDVO interface.

2.5.4PCI Express* Slots

•Two PCI Express* slots x1 for add-in cards.

•The PCI Express* bus complies with the PCI Express* Rev. 1.0a specification.

Crown Beach provides two PCI Express* Mini Card form factor slots. The PCI Express* specification pin-out is followed by Mini Card Slot A only and not by Mini Card Slot B. Mini Card Slot A is enabled by default and to enable Mini Card Slot B, rework needs to be performed. The slots are not to be used with PCI Express* Mini Card-based devices. Mini Card A (J7H1) is designed for use with CM100/CM101 cards from Quanta. Mini Card A can be populated with the Kedron, Echo Peak, or Shirley Peak wireless cards. Mini Card B (J2G1) is designed for use with Wireless WAN cards from Sierra Wireless* and Option*.

2.5.5Soft Audio/Soft Modem

High Definition Soft Audio/Soft Modem functionality is enabled through the Mott Canyon 4 daughter card. No direct connection is provided for Intel® HD Audio on

Document Number: 320264