HDD S.M.A.R.T. Capability
This feature allows your hard disk to report read/write errors and to issue warnings when third- party hardware monitor utility is installed.
Enabled | Enable HDD S.M.A.R.T. capability. |
Disabled | Disable HDD S.M.A.R.T. capability. (Default value) |
CPU Hyper-Threading (Note)
Enabled | Enable CPU Hyper Threading Feature. Please note that this feature is only |
| working for operating system with multi processors mode supported. |
| (Default value) |
Disabled | Disable CPU Hyper Threading. |
Limit CPUID Max. to 3 (Note)
Enabled | Limit CPUID Maximum value to 3 when use older OS like NT4. |
Disabled | Disable CPUID Limit for windows XP. (Default value) |
No-Execute Memory Protect(Note)
Enabled | Enable |
Disabled | Disable |
CPU Enhanced Halt (C1E) (Note)
Enabled | Enable CPU Enhanced Halt (C1E) function. (Default value) |
Disabled | Disable CPU Enhanced Halt (C1E) function. |
CPU Thermal Monitor 2 (TM2) (Note)
Enabled | Enable CPU Thermal Monitor 2 (TM2) function. (Default value) |
Disabled | Disable CPU Thermal Monitor 2 (TM2) function. |
CPU EIST Function (Note)
Enabled | Enable CPU EIST function. (Default value) |
Disabled | Disable EIST function. |
Virtualization Technology (Note)
Enabled | Enable Virtualization technology function. (Default value) |
Disabled | Disable this function. |
Full Screen LOGO Show
Enabled | Show full screen logo at system startup. (Default value) |
Disabled | Disable this function. If you wish to see BIOS POST screen, set this item to |
| "Disabled". |
English
(Note) This item will show up when you install a processor which supports this function.
- 35 - | BIOS Setup |