Intel GA-G31M-S2C Robust Graphics Booster, CPU Clock Ratio Note, CPU Host Clock Control

Page 49

2-9

MB Intelligent Tweaker(M.I.T.)

 

 

 

 

 

 

 

 

 

CMOS Setup Utility-Copyright (C) 1984-2008 Award Software

 

 

 

 

MB Intelligent Tweaker(M.I.T.)

 

 

 

Robust Graphics Booster

[Auto]

 

 

Item Help

 

CPU Clock Ratio (Note)

[25X]

 

Menu Level`

 

CPU Host Clock Control

[Disabled]

 

 

 

x CPU Host Frequency (Mhz)

133

 

 

 

 

PCI Express Frequency (Mhz)

[Auto]

 

 

 

 

Performance Enhance

[Standard]

 

 

 

 

System Memory Multiplier (SPD)

[Auto]

 

 

 

 

Memory Frequency (Mhz) 533

533

 

 

 

 

High Speed DRAM DLL Settings

[Option 1]

 

 

 

******** System Voltage Optimized

********

 

 

 

 

System Voltage Control

[Manual]

 

 

 

 

DDR2 OverVoltage Control

[Normal]

 

 

 

 

FSB OverVoltage Control

[Normal]

 

 

 

 

CPU Voltage Control

[Normal]

 

 

 

 

Normal CPU Vcore

1.38750V

 

 

 

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

 

F5: Previous Values

F6: Fail-Safe Defaults

 

F7: Optimized Defaults

 

 

 

 

 

 

 

•Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)

•When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings.

Robust Graphics Booster

Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo.

CPU Clock Ratio (Note)

Allows you to alter the clock ratio for the installed CPU.

The item is present only if a CPU with unlocked clock ratio is installed.

CPU Host Clock Control

Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled)

(Note) This item appears only if you install a CPU that supports this feature.

- 49 -

BIOS Setup

Page 48 Page 50
Image 49
Page 48 Page 50
Contents GA-G31M-S2C Motherboard GA-G31M-S2C Disclaimer CopyrightDocumentation Classifications Identifying Your Motherboard RevisionTable of Contents Regulatory Statements Box Contents GA-G31M-S2L/GA-G31M-S2C Motherboard Layout CPU CLK+ Page Installation Precautions Hardware InstallationCPU Product Specifications4 Mbit flash Page Installing the CPU Installing the CPU and CPU CoolerCPU Socket Lever Installing the CPU Cooler Dual Channel Memory Configuration Installing the MemoryInstalling a Memory Installing an Expansion Card Back Panel Connectors Line Out Jack Green Line In Jack BlueMic In Jack Pink Pwrled Internal ConnectorsGND CPUFAN/SYSFAN Fan Headers FDD Floppy Disk Drive ConnectorSATAII0/1/2/3 Sata 3Gb/s Connectors, Controlled by ICH7 IDE IDE ConnectorBatbattery Pwrled System Power LED HeaderFpanel Front Panel Header Faudio Front Panel Audio Header Cdin CD In ConnectorFUSB1/FUSB2 USB Headers Spdifo S/PDIF Out HeaderCI Chassis Intrusion Header Clrcmos Clearing Cmos JumperGA-G31M-S2L/S2C Motherboard Bios Setup Startup Screen Following screen may appear when the computer bootsBios Setup Program Function Keys Sample Bios Version GA-G31M-S2L D9aMain Menu „ Advanced Bios Features „ Standard Cmos Features„ Power Management Setup „ PnP/PCI ConfigurationsTime DateIDE Channel 0 Master/Slave IDE Channel 2, 3 Master/SlaveDrive a Floppy 3 Mode SupportHalt On MemoryFirst/Second/Third Boot Device Hard Disk Boot PriorityPassword Check HDD S.M.A.R.T. CapabilityLimit Cpuid Max. to 3 Note CPU Multi-Threading NoteNo-Execute Memory Protect Note CPU Enhanced Halt C1E NoteOnboard VGA Init Display FirstOn-Chip Frame Buffer Size On-Chip Primary PCI IDE On-Chip Sata ModePata IDE Set to Sata Port 0/2 Set toSata Port 1/3 Set to Smart LAN LAN Cable Diagnostic FunctionUSB Controller USB 2.0 ControllerParallel Port Mode Onboard LAN Boot ROMOnboard Serial Port Onboard Parallel PortSoft-Off by PWR-BTTN Power On by RingPME Event Wake Up Hpet Mode Note Resume by AlarmPower On By Mouse Power On By KeyboardPCI1 IRQ Assignment PnP/PCI ConfigurationsPCI2 IRQ Assignment Current CPU Temperature Reset Case Open StatusCPU Warning Temperature Case OpenedCPU Clock Ratio Note Robust Graphics BoosterCPU Host Clock Control CPU Host Frequency Mhz High Speed Dram DLL SettingsPCI Express Frequency Mhz Performance EnhanceCPU Voltage Control FSB OverVoltage ControlNormal CPU Vcore Load Optimized Defaults Load Fail-Safe DefaultsSet Supervisor/User Password Exit Without Saving Save & Exit SetupInstalling Chipset Drivers Drivers InstallationDriver CD Information Software ApplicationsContact Us Hardware InformationGA-G31M-S2L/S2C Motherboard Before You Begin Xpress Recovery2System Requirements Installing Windows XP and Partitioning the Hard Drive Installation and ConfigurationPage Using the Backup Function in Xpress Recovery2 Accessing Xpress Recovery2Removing the Backup Using the Restore Function in Xpress Recovery2Exiting Xpress Recovery2 Updating the Bios with the Q-Flash Utility Bios Update UtilitiesUpdating the Bios Load Optimized DefaultsSaveY/N?& ExitY Setup Installing and Using @BIOS Updating the Bios with the @BIOS UtilityOptions and Instructions Update the Bios without Using the Internet Update Function EasyTune 5 Pro Interface Button Information Table EasyTune 5 ProGA-G31M-S2L/S2C Motherboard Configuring 2/4/5.1-Channel Audio Configuring Audio Input and OutputConfiguring Speakers Speakers or Headphones Activating an AC97 Front Panel Audio Module Configuring Sound EffectMuting the Back Panel Audio For HD Audio Only Installing the S/PDIF Out Cable Installing the S/PDIFOut Cable OptionalPdif out Configuring S/PDIF out Configuring Microphone Recording Select Realtek HD Audio Input in the Mixer device list Recording the Sound Using the Sound RecorderPlaying the Sound Frequently Asked Questions TroubleshootingStart Troubleshooting ProcedureEND Regulatory Notices Weee Symbol StatementOur Commitment to Preserving the Environment China Restriction of Hazardous Substances Table GA-G31M-S2L/S2C Motherboard Appendix GA-G31M-S2L/S2C Motherboard B.T. INC USA Mexico Contact UsGigabyte Global Service System

GA-G31M-S2C, GA-G31M-S2L specifications

The Intel GA-G31M-S2L and GA-G31M-S2C are motherboards that represent a blend of innovation and reliability in the realm of computing. Designed by Gigabyte, these motherboards cater predominantly to budget-conscious consumers, gamers, and professionals seeking a stable platform for their computing needs. Powered by the Intel G31 chipset, these models support Intel's LGA 775 socket processors, which include the Pentium and Core 2 Duo series, making them versatile options for various applications.

One of the standout features of the GA-G31M-S2L and GA-G31M-S2C is their support for DDR2 memory with a maximum capacity of 4GB. This makes them suitable for running multiple applications simultaneously, providing users with a smoother multitasking experience. The motherboards support a dual-channel memory architecture, maximizing memory bandwidth, which is critical for performance-demanding applications and tasks.

In terms of connectivity, both models boast an array of ports, including USB 2.0 and Serial ATA (SATA) interfaces. This allows users to connect various peripherals and storage devices seamlessly. Additionally, the GA-G31M-S2C variant offers integrated graphics powered by Intel’s GMA 3100, providing a decent graphical performance for casual users who may not require a dedicated graphics card. Meanwhile, the GA-G31M-S2L can be fitted with a dedicated GPU for enhanced gaming experiences.

The motherboards also feature Gigabyte's renowned Ultra Durable technology, which incorporates durable capacitors, solid-state chokes, and a robust PCB design. This ensures enhanced stability and longevity, making them ideal for long-term use. Another noteworthy aspect is their support for PCI Express slots, enabling users to upgrade their systems with additional hardware, such as graphics cards or network adapters.

Security features are not overlooked, with options for BIOS-level protection that helps safeguard the motherboard from unauthorized access. The GA-G31M-S2L and GA-G31M-S2C are also equipped with an easy-to-use BIOS interface, allowing users to tweak settings for optimal performance.

In summary, the Intel GA-G31M-S2L and GA-G31M-S2C motherboards deliver a solid foundation for both everyday computing and more demanding tasks. With their blend of essential features, connectivity options, and durability, they stand out as reliable choices for users looking to build or upgrade their systems using the Intel LGA 775 platform. These motherboards embody a practical approach to computing, ensuring users have access to the necessary tools to achieve their goals.
Top Page Image Contents