Intel GA-G31M-S2L, GA-G31M-S2C user manual Fpanel Front Panel Header

Page 28

10) F_PANEL (Front Panel Header)

Connect the power switch, reset switch, speaker and system status indicator on the chassis front panel to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

20 19

SPEAK-

Speaker Connector

SPEAK+

 

 

 

 

PW-

 

 

 

 

 

NC

RES+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Switch

 

 

PW+

 

 

 

 

 

 

 

RES-

 

 

 

 

Reset Switch

 

 

 

 

MSG-

 

 

 

 

 

HD-

 

 

 

Message LED/

 

 

MSG+

 

 

 

 

 

HD+

 

 

IDE Hard Disk

Power/

 

2

1

 

 

 

 

 

 

 

Active LED

Sleep LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MSG (Message/Power/Sleep LED):

System Status

LED

Connects to the power status indicator on the chassis front panel. The

 

 

LED is on when the system is operating. The LED keeps blinking when

S0

On

 

 

the system is in S1 sleep state. The LED is off when the system is in

S1

Blinking

S3/S4/S5

Off

S3/S4 sleep state or powered off (S5).

PW (Power Switch):

Connects to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch (refer to Chapter 2, "BIOS Setup," "Power Management Setup," for more information).

SPEAK (Speaker):

Connects to the speaker on the chassis front panel. The system reports system startup status by issuing a beep code. One single short beep will be heard if no problem is detected at system startup. If a problem is detected, the BIOS may issue beeps in different patterns to indicate the problem. Refer to Chapter 5, "Troubleshooting," for information about beep codes.

HD (IDE Hard Drive Activity LED)

Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.

RES (Reset Switch):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.

NC:

No connection

The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assign- ments and the pin assignments are matched correctly.

GA-G31M-S2L/S2C Motherboard

- 28 -

Image 28
Contents GA-G31M-S2C Motherboard GA-G31M-S2C Copyright DisclaimerDocumentation Classifications Identifying Your Motherboard RevisionTable of Contents Regulatory Statements Box Contents GA-G31M-S2L/GA-G31M-S2C Motherboard Layout CPU CLK+ Page Hardware Installation Installation PrecautionsProduct Specifications CPU4 Mbit flash Page Installing the CPU and CPU Cooler Installing the CPUCPU Socket Lever Installing the CPU Cooler Installing the Memory Dual Channel Memory ConfigurationInstalling a Memory Installing an Expansion Card Back Panel Connectors Line Out Jack Green Line In Jack BlueMic In Jack Pink Internal Connectors PwrledGND FDD Floppy Disk Drive Connector CPUFAN/SYSFAN Fan HeadersIDE IDE Connector SATAII0/1/2/3 Sata 3Gb/s Connectors, Controlled by ICH7Pwrled System Power LED Header BatbatteryFpanel Front Panel Header Cdin CD In Connector Faudio Front Panel Audio HeaderSpdifo S/PDIF Out Header FUSB1/FUSB2 USB HeadersClrcmos Clearing Cmos Jumper CI Chassis Intrusion HeaderGA-G31M-S2L/S2C Motherboard Bios Setup Following screen may appear when the computer boots Startup ScreenBios Setup Program Function Keys Sample Bios Version GA-G31M-S2L D9aMain Menu „ Standard Cmos Features „ Advanced Bios Features„ Power Management Setup „ PnP/PCI ConfigurationsDate TimeIDE Channel 0 Master/Slave IDE Channel 2, 3 Master/SlaveFloppy 3 Mode Support Drive aHalt On MemoryHard Disk Boot Priority First/Second/Third Boot DevicePassword Check HDD S.M.A.R.T. CapabilityCPU Multi-Threading Note Limit Cpuid Max. to 3 NoteNo-Execute Memory Protect Note CPU Enhanced Halt C1E NoteOnboard VGA Init Display FirstOn-Chip Frame Buffer Size On-Chip Sata Mode On-Chip Primary PCI IDEPata IDE Set to Sata Port 0/2 Set toSmart LAN LAN Cable Diagnostic Function Sata Port 1/3 Set toUSB Controller USB 2.0 ControllerOnboard LAN Boot ROM Parallel Port ModeOnboard Serial Port Onboard Parallel PortSoft-Off by PWR-BTTN Power On by RingPME Event Wake Up Resume by Alarm Hpet Mode NotePower On By Mouse Power On By KeyboardPCI1 IRQ Assignment PnP/PCI ConfigurationsPCI2 IRQ Assignment Reset Case Open Status Current CPU TemperatureCPU Warning Temperature Case OpenedCPU Clock Ratio Note Robust Graphics BoosterCPU Host Clock Control High Speed Dram DLL Settings CPU Host Frequency MhzPCI Express Frequency Mhz Performance EnhanceCPU Voltage Control FSB OverVoltage ControlNormal CPU Vcore Load Fail-Safe Defaults Load Optimized DefaultsSet Supervisor/User Password Save & Exit Setup Exit Without SavingDrivers Installation Installing Chipset DriversSoftware Applications Driver CD InformationHardware Information Contact UsGA-G31M-S2L/S2C Motherboard Before You Begin Xpress Recovery2System Requirements Installation and Configuration Installing Windows XP and Partitioning the Hard DrivePage Accessing Xpress Recovery2 Using the Backup Function in Xpress Recovery2Removing the Backup Using the Restore Function in Xpress Recovery2Exiting Xpress Recovery2 Bios Update Utilities Updating the Bios with the Q-Flash UtilityUpdating the Bios Load Optimized DefaultsSaveY/N?& ExitY Setup Installing and Using @BIOS Updating the Bios with the @BIOS UtilityOptions and Instructions Update the Bios without Using the Internet Update Function EasyTune 5 Pro EasyTune 5 Pro Interface Button Information TableGA-G31M-S2L/S2C Motherboard Configuring 2/4/5.1-Channel Audio Configuring Audio Input and OutputConfiguring Speakers Speakers or Headphones Activating an AC97 Front Panel Audio Module Configuring Sound EffectMuting the Back Panel Audio For HD Audio Only Installing the S/PDIF Out Cable Installing the S/PDIFOut Cable OptionalPdif out Configuring S/PDIF out Configuring Microphone Recording Select Realtek HD Audio Input in the Mixer device list Recording the Sound Using the Sound RecorderPlaying the Sound Troubleshooting Frequently Asked QuestionsTroubleshooting Procedure StartEND Regulatory Notices Weee Symbol StatementOur Commitment to Preserving the Environment China Restriction of Hazardous Substances Table GA-G31M-S2L/S2C Motherboard Appendix GA-G31M-S2L/S2C Motherboard Contact Us B.T. INC USA MexicoGigabyte Global Service System

GA-G31M-S2C, GA-G31M-S2L specifications

The Intel GA-G31M-S2L and GA-G31M-S2C are motherboards that represent a blend of innovation and reliability in the realm of computing. Designed by Gigabyte, these motherboards cater predominantly to budget-conscious consumers, gamers, and professionals seeking a stable platform for their computing needs. Powered by the Intel G31 chipset, these models support Intel's LGA 775 socket processors, which include the Pentium and Core 2 Duo series, making them versatile options for various applications.

One of the standout features of the GA-G31M-S2L and GA-G31M-S2C is their support for DDR2 memory with a maximum capacity of 4GB. This makes them suitable for running multiple applications simultaneously, providing users with a smoother multitasking experience. The motherboards support a dual-channel memory architecture, maximizing memory bandwidth, which is critical for performance-demanding applications and tasks.

In terms of connectivity, both models boast an array of ports, including USB 2.0 and Serial ATA (SATA) interfaces. This allows users to connect various peripherals and storage devices seamlessly. Additionally, the GA-G31M-S2C variant offers integrated graphics powered by Intel’s GMA 3100, providing a decent graphical performance for casual users who may not require a dedicated graphics card. Meanwhile, the GA-G31M-S2L can be fitted with a dedicated GPU for enhanced gaming experiences.

The motherboards also feature Gigabyte's renowned Ultra Durable technology, which incorporates durable capacitors, solid-state chokes, and a robust PCB design. This ensures enhanced stability and longevity, making them ideal for long-term use. Another noteworthy aspect is their support for PCI Express slots, enabling users to upgrade their systems with additional hardware, such as graphics cards or network adapters.

Security features are not overlooked, with options for BIOS-level protection that helps safeguard the motherboard from unauthorized access. The GA-G31M-S2L and GA-G31M-S2C are also equipped with an easy-to-use BIOS interface, allowing users to tweak settings for optimal performance.

In summary, the Intel GA-G31M-S2L and GA-G31M-S2C motherboards deliver a solid foundation for both everyday computing and more demanding tasks. With their blend of essential features, connectivity options, and durability, they stand out as reliable choices for users looking to build or upgrade their systems using the Intel LGA 775 platform. These motherboards embody a practical approach to computing, ensuring users have access to the necessary tools to achieve their goals.