Intel GA-945PL-S3G user manual CPU Clock Ratio Note, Robust Graphics Booster, FSB1333 Core.2 CPU

2-9	MB Intelligent Tweaker(M.I.T.)
		CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
			MB Intelligent Tweaker(M.I.T.)
	CPU Clock Ratio (Note)		[22X]			Item Help
	Robust Graphics Booster		[Auto]		Menu Level`
	O.C. FSB1333 Core.2 CPU		[Auto]
	CPU Host Clock Control		[Disabled]
x CPU Host Frequency (Mhz)			133
	PCI Express Frequency (Mhz)		[Auto]
	System Memory Multiplier		[Auto]
	Memory Frequency (Mhz)		533
	DIMM OverVoltage Control		[Normal]
	PCI-E OverVoltage Control		[Normal]
	FSB OverVoltage Control		[Normal]
	CPU Voltage Control		[Normal]
	Normal CPU Vcore		1.38750V
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)

CPU Clock Ratio (Note)

Allows you to alter the clock ratio for the installed CPU.

The item is present only if a CPU with unlocked clock ratio is installed.

Robust Graphics Booster

Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo.

O.C. FSB1333 Core.2 CPU

Allows you to decide whether to enable the use of a CoreTM 2 CPU with 1333 MHz FSB through overclocking. Note: You must install the FSB 1333 MHz CoreTM 2 CPU with DDR2 533 (or above) memory module(s).

Auto	Sets this item to Auto, then save the changes and restart your computer.
	During the POST, a message will appear asking if you want to enable the use
	of a FSB 1333 CoreTM 2 processor through overclocking. Press <Y> to confirm
	or <N> to reject. Or press any key to continue the POST. (Default)
Disabled	Disables this function.
Enabled	Enables this function.

(Note) This item appears only if you install a CPU that supports this feature.

GA-945PL-S3G Motherboard - 44 -