English
3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector)
The cooler fan power connector supplies a +12V power voltage via a
Most coolers are designed with
Remember to connect the CPU/system fan cable to the CPU_FAN/SYS_FAN connector to prevent CPU damage or system hanging caused by overheating.
1 | Pin No. | Definition | |
1 | GND | ||
|
CPU_FAN | 2 | +12V | ||
|
|
| 3 | Sense |
|
|
| 4 | Speed Control |
|
|
| ||
1 |
|
|
| (Only for CPU_FAN) |
|
|
|
| |
|
|
|
|
|
SYS_FAN |
|
| ||
5)IDE (IDE Connector)
An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device). Before attaching the IDE cable, please take note of the foolproof groove in the IDE connector.
4039
21
- 20 - |