Standard Cmos Features, Date, Time | Intel GA-8N775 specification

Intel GA-8N775 user manual Standard Cmos Features, Date, Time, IDE Channel 2/3/4/5 Master

Page 32

2-1	Standard CMOS Features

		CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Wed, Nov 23 2005		Item Help
	Time (hh:mm:ss)		22:31:24		Menu Level`
` IDE Channel 0 Master			[None]		Change the day, month,
` IDE Channel 0 Slave			[None]		year
` IDE Channel 1 Master			[None]
` IDE Channel 1 Slave			[None]		<Week>
` IDE Channel 2 Master			[None]		Sun. to Sat.
` IDE Channel 3 Master			[None]
` IDE Channel 4 Master			[None]		<Month>
	Drive A		[1.44M, 3.5"]		Jan. to Dec.
	Drive A		[1.44M, 3.5"]
	Drive B		[None]		<Day>
	Floppy 3 Mode Suport		[Disabled]		1 to 31 (or maximum
	Halt On		[All, But Keyboard]		allowed in the month)
	Halt On		[All, But Keyboard]		<Year>
					<Year>
	Base Memory		640K		1999 to 2098
	Extended Memory		511M
	Total Memory		512M
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Date

The date format is <week>, <month>, <day>, <year>.

Week	The week, from Sun to Sat, determined by the BIOS and is displayed only.
Month	The month, Jan. through Dec.
Day	The day, from 1 to 31 (or the maximum allowed in the month)
Year	The year, from 1999 through 2098.

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00.

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master/Slave ; IDE Channel 1 Master/Slave IDE devices setup. You can use one of three methods:

• Auto	Allows BIOS to automatically detect IDE devices during POST. (Default value)
• None	Select this if no IDE devices are used and the system will skip the automatic
	detection step and allow for faster system start up.
• Manual	User can manually input the correct settings.
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)
Capacity	Capacity of currectly installed hard drive.

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive You can use one of the two methods:

• Auto	Allows BIOS to automatically detect IDE devices during POST(default)
• None	Select this if no IDE devices are used and the system will skip the automatic
	detection step and allow for faster system start up.
Access Mode	Use this to set the access mode for the hard drive. The two options are:
	Large/Auto(default:Auto)

GA-8N775 Motherboard		- 32 -

Image 32

Contents