Intel GA-8I915G DUO Drive a / Drive B, Floppy 3 Mode Support for Japan Area, Halt on, Memory

Page 33

Drive A / Drive B

The category identifies the types of floppy disk drive A or drive B that has been installed in the computer.

None

No floppy drive installed

360K, 5.25"

5.25 inch PC-type standard drive; 360K byte capacity.

1.2M, 5.25"

5.25 inch AT-type high-density drive; 1.2M byte capacity

 

(3.5 inch when 3 Mode is Enabled).

720K, 3.5"

3.5 inch double-sided drive; 720K byte capacity

1.44M, 3.5"

3.5 inch double-sided drive; 1.44M byte capacity.

2.88M, 3.5"

3.5 inch double-sided drive; 2.88M byte capacity.

Floppy 3 Mode Support (for Japan Area)

Disabled

Normal Floppy Drive. (Default value)

Drive A

Drive A is 3 mode Floppy Drive.

Drive B

Drive B is 3 mode Floppy Drive.

Both

Drive A & B are 3 mode Floppy Drives.

Halt on

The category determines whether the computer will stop if an error is detected during power up.

No Errors

The system boot will not stop for any error that may be detected and you

 

will be prompted.

All Errors

Whenever the BIOS detects a non-fatal error the system will be stopped.

All, But Keyboard

The system boot will not stop for a keyboard error; it will stop for all other

 

errors. (Default value)

All, But Diskette

The system boot will not stop for a disk error; it will stop for all other errors.

All, But Disk/Key

The system boot will not stop for a keyboard or disk error; it will stop for all

 

other errors.

Memory

The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system.

The value of the base memory is typically 512K for systems with 512K memory installed on

the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.

Extended Memory

The BIOS determines how much extended memory is present during the POST.

This is the amount of memory located above 1 MB in the CPU's memory address map.

Total Memory

This item displays the memory size that used.

English

- 33 -

BIOS Setup

Page 32 Page 34
Image 33
Page 32 Page 34
Contents GA-8I915G Duo Motherboard Product Manual Classification CopyrightTable of Contents Install Drivers Duo GA-8I915G Duo Motherboard LayoutBlock Diagram Page Installation Notices Considerations Prior to InstallationInstances of Non-Warranty Preparing Your ComputerCPU Feature SummaryUse of licensed Award Bios Installation of the CPU Installation of the CPU and HeatsinkInstallation of the Heatsink Installation of Memory Dual Channel DDR/DDR Installation of Expansion Cards I/O Back Panel Introduction Connectors Introduction Center/Subwoofer Speaker OutSurround Speaker Out ATX12V/ATX Power Connector Nbfan Chip Fan Connector 5 Cpufan / Sysfan / Pwrfan Cooler Fan Power ConnectorIDE1/IDE2/IDE3 IDE Connector FDD Floppy ConnectorPwrled SATA0/SATA1/SATA2/SATA3 Serial ATA ConnectorFpanel Front Panel Jumper Cdin CD AZALIAFPFront Audio Panel ConnectorComa Serial Port Connector USB1 / FUSB2 Front USB ConnectorClrcmos Clear Cmos 17 IRBATBattery English Main Menu Status Page Setup Menu / Option Page Setup MenuMain Menu For example Bios Ver. F4 „ Set User Password „ Set Supervisor Password„ Save & Exit Setup „ Exit Without SavingStandard Cmos Features TimeIDE Channel 0/2/3 Master, Slave Drive a / Drive B Floppy 3 Mode Support for Japan AreaHalt on MemoryAdvanced Bios Features Hard Disk Boot PriorityFirst / Second / Third Boot Device CPU Hyper-Threading Password CheckLimit Cpuid Max. to No-Execute Memory Protect NoteOn-Chip Primary PCI IDE Integrated PeripheralsPata IDE Set to On-Chip Sata ModeSata Port 0/2 Set to Sata Port 1/3 Set toUart Mode Select Onboard LAN Boot ROMUR2 Duplex Mode Parallel Port ModePower Management Setup Resume by AlarmPower On By Mouse Power On By Keyboard KB Power on PasswordAC Back Function PCI 1 IRQ Assignment PnP/PCI ConfigurationsPC Health Status MB Intelligent TweakerM.I.T CPU Smart FAN ModeCPU Clock Ratio Robust Graphics BoosterCPU Host Frequency Mhz CPU Host Clock ControlPCI-E Frequency to CPU Memory Frequency ForLoad Optimized Defaults Load Fail-Safe DefaultsPCI-E OverVoltage Control CPU Voltage ControlSet Supervisor/User Password Exit Without Saving Save & Exit SetupEnglish Install Chipset Drivers Install DriversDriver CD Information Software ApplicationsContact Us Hardware InformationEnglish Unique Software Utilities Xpress Recovery Introduction What is Xpress Recovery ?How to use the Xpress Recovery F9 For Xpress Recovery Exit and Restart Remove Backup Image  Remove backup image. Are you sure? Y/NFlash Bios Method Introduction Method 1 Q-FlashTMUtilityBefore You Begin Task menu for Dual Bios utility Exploring the Q-FlashTM / Dual Bios utility screenEntering the Q-FlashTMutility Task menu for Q-Flash utilitySteps Using the Q-FlashTMutilityYou can repeat to 4 to flash the backup BIOS, too Part Two English Exploring the Q-FlashTMutility screenBios file becomes F4 after updating Congratulation!! You have updated Bios successfullyMethods and steps Method 2 @BIOSTM UtilityEnglish 4 2 / 4 / 5.1 / 7.1 Channel Audio Function Introduction Channel Audio Setup Step English English Digital I/O Status Device SettingMixer EffectTroubleshooting AMI Bios Beep Codes English English English English English Taiwan Headquarters Contact UsChina Shanghai

GA-8I915G DUO specifications

The Intel GA-8I915G DUO motherboard represents an interesting blend of performance, reliability, and modern features designed to meet the demands of users looking for a robust computing platform. Built around Intel's 915G chipset, this motherboard supports Intel's LGA 775 socket, which accommodates various processors including the Pentium 4, Pentium D, and Celeron D.

One of the standout features of the GA-8I915G DUO is its support for dual-channel DDR2 memory. With dual-channel technology, users can take advantage of enhanced memory bandwidth, resulting in improved overall system performance. The motherboard supports a maximum of 4GB of RAM, allowing for efficient multitasking and smoother operation of memory-intensive applications.

The integrated graphics capabilities of the GA-8I915G DUO are powered by Intel’s Graphics Media Accelerator 900 (GMA 900). This provides decent graphical performance suitable for general computing tasks and light gaming. The board also includes a PCI Express x16 slot, which allows for the installation of a dedicated graphics card, providing flexibility for users who require enhanced graphics performance.

Connectivity options on the GA-8I915G DUO are extensive, featuring multiple USB 2.0 ports for peripherals, as well as a Gigabit Ethernet port for high-speed networking. Additionally, the motherboard is equipped with six SATA ports, supporting RAID configurations for enhanced storage performance and data redundancy. This is particularly beneficial for users who demand reliability and efficiency in data management.

Another significant characteristic of the GA-8I915G DUO is its compatibility with various audio technologies. The onboard AC’97 audio provides a satisfactory audio experience for everyday tasks, while also supporting up to 6-channel sound output for a more immersive audio experience during multimedia playback.

The GA-8I915G DUO is designed with ease of use in mind. Its BIOS offers a variety of settings for performance tuning, allowing users to optimize their system according to their preferences. Additionally, the motherboard is built with durable components, ensuring long-lasting performance.

In conclusion, the Intel GA-8I915G DUO motherboard combines a solid feature set with reliable performance, making it an excellent choice for users who need a dependable computing platform for both everyday tasks and multimedia applications.
Top Page Image Contents