Intel 8S661FXMP-RZ Password Check, CPU Hyper-Threading, Limit Cpuid Max. to, Init Display First

Page 26
Disable CPU Hyper Threading.
Enable CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. (Default value)

English

Password Check

Setup

The system will boot but will not access to Setup page if the correct password

 

is not entered at the prompt. (Default value)

System

The system will not boot and will not access to Setup page if the correct

 

password is not entered at the prompt.

CPU Hyper-Threading

This option is available only when you install an Intel® processor supporting Hyper-Threading Technology.

Disabled Enabled

Limit CPUID Max. to 3

This option is available only when you install an Intel® Prescott processor

Enabled

Limit CPUID Maximum value to 3 when using older OS like NT4. (Defaults

 

value)

Disabled

Disable CPUID Limit for Windows XP.

Init Display First

Select the first initiation of the monitor display from AGP or PCI VGA card.

PCI

Set Init Display First to PCI.

AGP

Set Init Display First to AGP. (Default value)

8S661FXMP-RZ Motherboard

- 26 -

Image 26
Contents 8S661FXMP-RZ Motherboard 8S661FXMP-RZ Installing the motherboard to the chassis Preparing Your ComputerTable of Content Features Summary IntroductionEnglish 8S661FXMP-RZ Motherboard Layout 8S661FXMP-RZBlock Diagram Hardware Installation Process StepCPU Installation Install memory modules Install expansion cards Install I/O Peripherals CablesLine 11 13LAN Port Line Out Front Speaker OutCpufan CPU FAN Connector ATX12V/ATX Power ConnectorIDE1/ IDE2 IDE1/IDE2 Connector Sysfan System FAN ConnectorFDD Floppy Connector SATA0/SATA1 Serial ATA Connector, Controlled by SiS964 Fpanel 2x10 pins connectorBAT Battery Faudio Front Audio Panel ConnectorCdin CD In Connector Spdifio Spdif In/OutCI Chassis Intrusion, Case Open USB1 / FUSB2 Front USB ConnectorsComb Comb Connector Clrcmos Clear Cmos Status Page Setup Menu / Option Page Setup Menu Main Menu For example Bios Ver. E2Entering Bios Setup Main MenuPnP/PCI Configuration Advanced Bios FeaturesPower Management Setup Load Fail-Safe DefaultsTime Standard Cmos FeaturesDate IDE Channel 0 Master, Slave / IDE Channel 1 Master, SlaveHalt on Floppy 3 Mode Support for Japan AreaDrive a / Drive B MemoryFirst / Second / Third Boot Device Advanced Bios FeaturesHard Disk Boot Priority Boot Up Floppy SeekLimit Cpuid Max. to Password CheckCPU Hyper-Threading Init Display FirstIntegrated Peripherals USB Controller SiS Serial ATA ModeOnboard LAN device USB Legacy SupportECP Mode Use DMA Power Management SetupParallel Port Mode Acpi Suspend TypeResume by Alarm Power On by KeyboardPower On by Mouse Power LED in S1 statePCI 2 IRQ Assignment PnP/PCI ConfigurationsPCI 1 IRQ Assignment PCI 3 IRQ AssignmentPC Health Status MB Intelligent Tweaker M.I.T AGP/PCI Clock Control CPU Clock MHzDram Clock MHz AGP Clock MHzSet Supervisor/User Password Load Fail-Safe DefaultsLoad Optimized Defaults Save & Exit Setup Exit Without SavingInstall Drivers Pictures below are shown in Windows XPItem Description Contact Us Taiwan HeadquartersChina Shanghai