Intel GA-4MXSV user manual Installing Heat Sink

Hardware Installation Process

Step1-2: Installing Heat Sink

Male Push Pin

The top of Female Push Pin

Female Push Pin

Fig.1

Please apply heatsink paste on the surface of the installed CPU.

Fig. 3

Place the heatsink on top the CPU and make sure the push pins align to the pin hole on the m o t h e r b o a r d . P u s h d o w n t h e p u s h p i n s diagonally.

Fig. 5

Please check the back side of teh motherboard. Make sure the push pin is seated firmly as the picture shown. Installation completed.

Fig. 2

( to remove the heatsink, turning the push pin along the direction of arrow; and reverse the previous step to install the heat sink.)

Please note the direction of arrow sign on the male push pin doesn't face inwards before installation. (This instruction is only for Intel boxed fan)

Fig. 4

Please make sure the Male and Female push pin are brought together. (for detailed installation instructions, please refer to the heatsink installation section of the user manual)

Fig. 6

Attach the power connector of the heatsink to the CPU fan header located on the motherboard.

1 1