Intel 8S651M-RZ-C user manual Frequency/Voltage Control

English

SYSTEM FAN Fail Warning

Disabled	Fan Warning Function Disable. (Default value)
Enabled	Fan Warning Function Enable.

Frequency/Voltage Control

	CMOS Setup Utility-Copyright (C) 1984-2004		Award Software
		Frequency/Voltage Control
CPU Clock Ratio		[10X]		Item Help
Linear	Frequency Control	[Disabled]		Menu Level u
x CPU	Clock (MHz)	100
x DRAM	Clock (MHz)	AUTO
x AGP	Clock (MHz)	AUTO
x PCI	Clock (MHz)	AUTO

higf: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC:	Exit	F1: General Help
F5: Previous Values		F6: Fail-Save Default		F7:	Optimized	Defaults

CPU Clock Ratio

This setup option will automatically assign by CPU detection.

For Willamette CPU:

8X~23X default: 14X

For C-Stepping P4:

8X,10X~24X default: 15X

For Northwood CPU: 12X~24X default: 16X

The option will display "Locked" and read only if the CPU ratio is not changeable.

Linear Frequency Control

Disabled	Disable this function. (Default value)
Enabled	Enable this function.

CPU Clock

100~355 Select CPU Clock to 100MHz~355M Hz.

If you use FSB400 Pentium 4 processor, please set "CPU Clock" to 100MHz.If you use FSB533 Pentium 4 processor, please set "CPU Clock" to 133MHz. If you use FSB800 Pentium 4 processor, please set "CPU Clock" to 200M Hz.

Incorrect using it may cause your system broken. For power End- User use only!

DRAM Clock (MHz)

Please set DRAM Clock according to your requirem ent.

If you use DDR200 DRAM module, please set "DRAM Clock(MHz)" to 200. If you use DDR333 DRAM module, please set "DRAM Clock(M Hz)" to 333.

Incorrect using it may cause your system broken. For power End- User use only!

8S651M -RZ Series Motherboard - 32 -