Onboard LAN Device (*)
Enabled | Enable onboard LAN device. (Default value) |
Disabled | Disable onboard LAN device. |
System Share Memory Size
4MB/8MB/16MB/32MB/64MB Set onchip VGA shared memory size.(Default Value:32MB)
USB Controller
Enabled | Enable USB Controller. (Default value) |
Disabled | Disable USB Controller. |
USB Legacy Support
Enabled | Enable USB Legacy Support. |
Disabled | Disable USB Legacy Support. (Default value) |
Init Display First
AGP | Set Init Display First to AGP. (Default value) |
PCI | Set Init Display First to PCI. |
Onboard Serial Port A
Auto | BIOS will automatically setup the port A address. |
3F8/IRQ4 | Enable onboard Serial port A and address is 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port A and address is 2F8. |
3E8/IRQ4 | Enable onboard Serial port A and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port A and address is 2E8. |
Disabled | Disable onboard Serial port A. |
Onboard Serial Port B
Auto | BIOS will automatically setup the port B address. |
3F8/IRQ4 | Enable onboard Serial port B and address is 3F8. |
2F8/IRQ3 | Enable onboard Serial port B and address is 2F8. (Default value) |
3E8/IRQ4 | Enable onboard Serial port B and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port B and address is 2E8. |
Disabled | Disable onboard Serial port B. |
Serial Port B Mode
(This item allows you to determ ine which Infra Red(IR) function of Onboard I/O chip)
ASKIR | Set onboard I/O chip UART to ASKIR Mode. |
IrDA | Set onboard I/O chip UART to IrDA M ode. |
Normal | Set onboard I/O chip UART to Normal Mode. (Default Value) |
Onboard Parallel port | |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default Value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
Disabled | Disable onboard LPT port. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
"*" For
English
- 27 - | BIOS Setup |