Clarion DX425 CD Mode Operations, Area Change, Loading a Disc, Stopping pausing Playback, English

Models: DX425

1 16
Download 16 pages 52.6 Kb
Page 11
Image 11
Area Change

Recalling ISR

Press the ISR button # then the display will show “ISR”, then the radio station previously memorized will be selected. Press the ISR but- ton # again to disengage the unit from the Recalling ISR function.

Area Change

Use this function when you are using the car stereo anywhere outside the U.S.

Switchable frequency spacing

This car stereo is initially set to tune in frequen- cy intervals of 10 kHz for AM and 200 kHz for FM, the standard calibrations in the U.S. When using the unit outside the U.S., use the following procedure to switch the frequency range.

The table below lists the frequency specifica- tions for the U.S. and other countries.

 

 

Initial Setting

New Setting

 

 

(U.S. standard)

(outside U.S.)

 

 

 

 

 

Frequency

10 kHz

9 kHz

 

spacing

 

 

 

AM

 

 

 

Frequency

530 to

531 to

 

 

range

1,710 kHz

1,629 kHz

 

 

 

 

 

Frequency

200 kHz

50 kHz

 

spacing

 

 

 

FM

 

 

 

Frequency

87.9 to

87.5 to

 

 

range

107.9 MHz

108 MHz

 

 

 

 

Switching the area change

Outside U.S. (New Setting)

While pressing the BAND button 4, press the SRCH Left button 2, then “outside US.”. will be selected.

Inside U.S. standard (Initial Setting)

While pressing the BAND button 4, press the SRCH Right button 2, then the “U.S. standard” will be selected.

CD Mode Operations

Loading a Disc

Insert the disc into the CD insertion slot with its label side up, then the CD will start playing.

For 5-inch (12 cm) CD For 3-inch (8 cm) single CD

*When inserting a single CD (3(8 cm)), insert it from the center of the slot.

*When inserting a single CD (3(8 cm)), do not con- nect an adapter.

*Press the DISP button 7, then the display will show the play time.

Notes:

Some CDs recorded in CD-R/CD-RW mode may not be usable.

Listening to the Disc already Inserted

Press the FUNC button 3 to select the CD mode, the CD will start playing.

Stopping (pausing) Playback

Press the Play/Pause button ´.

Press the Play/Pause button ´ again to resume playback.

Ejecting the CD

Press the Eject button 8, then the CD will be ejected.

Note:

If the ejected CD is left as it is, it will be reloaded after 15 seconds. However, single CDs will not be reloaded, so make sure to remove them.

English

DX425 13

Page 11
Image 11
Clarion DX425 CD Mode Operations, Area Change, Loading a Disc, Listening to the Disc already Inserted, Ejecting the CD