![](/images/new-backgrounds/1266858/266858117x1.webp)
8. Programmable Features
4.Press {e} or {v} repeatedly to display “TONE OPT”.
5.Press {>}.
6.Press {e} or {v} repeatedly to display the desired item.
For the key tone, select “KEY TONE”. For the call waiting tone, select “CALL WAITING”.
For the range warning alarm, select “RANGE ALARM”.
For the battery low alarm, select “BATTERY LOW”.
7.Press {>}.
8.Press {e} or {v} repeatedly to select “ON” or “OFF”.
9.Press {>} or {j}.
10.Press {ih}.
Display option settings
Selecting the standby mode display
1.Press {j}.
2.Press {e} or {v} repeatedly to display “SETTING HS”.
3.Press {>}.
4.Press {e} or {v} repeatedly to display “DISPLAY OPT”.
5.Press {>}.
6.Press {e} or {v} repeatedly to display “STANDBY MODE”.
7.Press {>}.
8.Press {e} or {v} repeatedly to select the desired setting.
“CLOCK” (default): Time and date will be displayed. Set the time and date on the handset beforehand (page 23).
“OFF”: Deactivates this feature.
“BS NO”: The base unit number will be displayed.
“HS NO”: The handset number will be displayed.
9.Press {>} or {j}.
10.Press {ih}.
Note:
LIf you subscribe to a Caller ID service, the display will show the number of new calls even if “CLOCK” has been selected.
Selecting the talk mode display
1.Press {j}.
2.Press {e} or {v} repeatedly to display “SETTING HS”.
3.Press {>}.
4.Press {e} or {v} repeatedly to display “DISPLAY OPT”.
5.Press {>}.
6.Press {e} or {v} repeatedly to display “TALK MODE”.
7.Press {>}.
8.Press {e} or {v} repeatedly to select the desired setting.
“TALK TIME” (default): Length of a call will be displayed.
“PHONE NO”: A phone number will be displayed.
9.Press {>} or {j}.
10.Press {ih}.
Note:
L Even if you select “PHONE NO”, the other party’s telephone number will not appear on your display in the following cases:
–When you receive calls without subscribing to a Caller ID service, or
–When you switch a call from the base unit to the handset.
Selecting the display language
1.Press {j}.
2.Press {e} or {v} repeatedly to display “SETTING HS”.
3.Press {>}.
4.Press {e} or {v} repeatedly to display “DISPLAY OPT”.
5.Press {>}.
6.Press {e} or {v} repeatedly to display “LANGUAGE”.
7.Press {>}.
8.Press {e} or {v} repeatedly to select the desired language from “ENGLISH” (default), “GERMAN”, “SPANISH”, “FRENCH”, “ITALIAN”, “DUTCH”, “TURKISH”, “HUNGARIAN”, “PORTUGUESE”, “POLISH” and “F43 00”.
9.Press {>} or {j}.
10.Press {ih}.
Note:
LIf you set a language you cannot read, reset
the handset settings to their default settings (page 59).
L If “F43 00” is selected in step 8, the Command Interface will be displayed instead
57