![](/images/new-backgrounds/1266858/266858111x1.webp)
8. Programmable Features
To alert you with beeps when there is less than 60 seconds of remaining recording time. The slow beeps will continue until you erase the recorded messages (page 45, 49).
“ON”: You will be alerted that you have reached the recording time limit by a beeping sound. “OFF” (default): Deactivates this feature.
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON[±]
To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.
The slow beeps will continue until you clear the printing problem and make sure the unit is supplied with enough paper to print the stored document.
“ON” (default): You will be alerted to a reception problem by a beeping sound.
“OFF”: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON[±]
To receive a fax automatically when you answer a call using the base unit and hear a fax calling tone (slow beep).
“ON” (default): You do not have to press {FAX/START} for fax reception.
“OFF”: You have to press {FAX/START} for fax reception.
Code #47: Setting the fax voice guidance
FAX GUIDANCE
=ON[±]
If you wish to hear voice guidance, activate this feature.
“ON” (default): You will hear voice guidance.
“OFF”: Deactivates this feature.
“ERROR”: To hear voice guidance only when fax transmission/reception fails.
Code #51: Setting the mailbox 1 password
BOX1 PASSWORD
ID=
To prevent other users from retrieving your messages, program a password for mailbox 1.
1.Press {MENU}.
2.Press {#}, then {5}{1}.
3.Enter a
L The default ID is “555”.
4.Press {SET}.
5.Press {MENU}.
Code #52: Setting the mailbox 2 password
BOX2 PASSWORD
ID=
To prevent other users from retrieving your messages, program a password for mailbox 2.
1.Press {MENU}.
2.Press {#}, then {5}{2}.
3.Enter a
L The default ID is “555”.
4.Press {SET}.
5.Press {MENU}.
Code #54: Changing the recording time for your TAD/FAX greeting message
GREETING TIME
=16s [±]
“16s” (default): Maximum recording time is 16 seconds.
“60s”: Maximum recording time is 60 seconds. See page 44 for details.
Code #55: Greeting message for mailbox 1
BOX1 GREETING
CHECK [±]
See page 48 for details.
Code #56: Greeting message for mailbox 2
BOX2 GREETING
CHECK [±]
See page 48 for details.
Code #58: Setting the original mode
ORIGINAL
=NORMAL [±]
To send or copy a document with faint or dark writing, set this feature before starting transmission or copying.
“NORMAL” (default): Used for normal writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
Code #60: Setting the message transfer
MESSAGE TRANSFER
=OFF [±]
To transfer recorded incoming messages to another telephone (page 49), activate this feature and program the transfer telephone number.
54