Recording paper, Battery installation | Panasonic KX-FC195AL

1. Introduction and Installation

1.11 Recording paper

The unit can hold up to 50 sheets of 80 g/m2 paper. See the note for paper specifications (page 77).

1Before inserting a stack of paper, fan the paper to prevent paper jams.

1.12 Battery installation

1Insert the batteries negative (−) terminal first.

2 Close the battery cover.

2Pull the tension plate forward (1) and hold open while inserting the paper.

Side to be printed face down.

Recording paper entrance

2

1

LThe paper should not be over the tab (2).

LIf the paper is not inserted correctly, readjust the paper, or the paper may jam.

Correct		Incorrect

Stack of paper

1.13 Battery replacement

If 0688794 flashes and/or the handset beeps even when the handset batteries has been fully charged, both batteries must be replaced. Please use only Panasonic batteries. See page 11 for accessory information.

When replacing the batteries, ensure that the correct battery type is selected (page 59).

Important:

LOnly use rechargeable batteries. If you install non-rechargeable batteries and start charging, the batteries may leak electrolyte.

LDo not mix old and new batteries.

LUse only 2 nickel metal hydride (Ni-MH) batteries or 2 nickel cadmium (Ni-Cd) batteries. Do not mix battery types.

17

Image 19

Panasonic KX-FC195AL manual Recording paper, Battery installation, Battery replacement

Contents

Operating Instructions Open How to use the operating instructions Keys Location of controlsBase unit Handset Copyright For your future referencePage Instructions to customer InstallationService difficulties Important information For best performance Battery chargeOperating distance and noise Installation Important safety instructions Battery Phonebook Introduction Installation Index Quantity Specifications Included accessories Available accessories Accessory informationModel No Specifications/Usage Description of base unit buttons OverviewReceiver Microphone Description of handset display Description of handset buttons Raising the antenna Before installationInstalling the ink film Ink film Incorrect Replacing the ink film Metal recording paper guide Paper tray Battery replacement Battery installationRecording paper Power on Turning the handset power on/offPower off Connections Battery life Battery chargeBattery strength Battery icon Battery strength Ringer volume Adjusting handset volumeBase unit help function Fax voice guidance volume Adjusting base unit volumeHandset receiver volume Speaker volume Example 1515 24 hour clock entry Press Setting the time and date on the handsetSetting the date and time on the base unit Date and time Your logo Keys Characters To select characters using a or BTo change capital or lower-case letters To delete a character Example +64 9 Your fax numberTo delete a number With the handset Making phone calls With the base unit Answering phone calls Press LOCATOR/HOLD Handset locatorStoring names and telephone numbers into the phonebook Digital SP-PHONEand talk into the microphone Erasing a stored entry Making a phone call using the phonebookHot key Editing a stored entry To delete a character/number Making a phone call using a hot keyErasing a hot key Helpful hints Caller ID service Handset only Making a phone call using the navigator directoryHow Caller ID is displayed Calling back will not be possible in the following cases Visual Call Waiting Call Waiting ID Service Storing caller information into the phonebook Handset only This feature is not available in the following casesErasing caller information Sending a fax manually Documents you can send Sending a fax using the navigator directory Erasing a stored entry from the broadcast memory Broadcast transmissionProgramming entries into the broadcast memory Adding a new entry into the broadcast memory Receiving a fax manually Activating TEL modeTo cancel broadcast transmission How to receive calls with the base unit Activating TAD/FAX mode Activating FAX only modeReceiving a fax automatically Receiving a voice message and fax document in one call Ring setting in TAD/FAX mode Using with the ring detection feature Making a copy More copying features Example Making 2 copies of a 4-page original document To collate multiple copies Stop Recording your greeting messageLeaving a message for others or yourself Erasing your recorded greeting message Erasing recorded messages Listening to recorded messages Operating from a remote location Remote operations using the remote command keyKey Remote command When voice memory is full Voice guide Other remote operations Allowing callers to leave private messages Leaving messages in a mailbox Recording your mailbox greeting messagesListening to recorded mailbox messages To use a mailbox Transferring recorded messages to another telephone How this feature worksRecording your transfer greeting message Example 202 555 1234PP12345678PP5555# To check the transfer greeting messageTo erase your transfer greeting message Pager call Base unit programming Basic featuresProgramming basic features Programming advanced features Advanced features Code #43 Setting the recording time alert Code #31 Activating the Distinctive Ring featureCode #34 Setting the quick scan Code #42 Setting the message alert Code #51 Setting the mailbox 1 password Code #44 Setting the memory reception alertCode #46 Setting friendly reception Code #47 Setting the fax voice guidance Handset programming Ringer volume See Setting the time of alarmChanging the time alarm frequency Ringer option settings Selecting the talk mode display Display option settings Selecting the standby mode displaySelecting the display language Setting the direct call number Call option settings Setting the call BARChanging the direct call setting Feature Default setting Setting the auto talkSetting the battery type Resetting the handset settings to their default settings Changing base unit PIN Handset programming using the base unit PINSetting call restriction Cancelling a call restricted number Handset can be reset to the following default settings Example Additional handsets registered to 2 base units Cancelling a handsetOperating additional units Registering a handset to a base unit Setting the selected handsets to ring Selecting the ringer modeCancelling a base unit Setting all handsets to ring Transferring calls between handsets/Conference call Intercom between handsets Communication Error Code 43 Error messages ReportsError messages Base unit display Communication Error Code 40-42, 46-72, FF Unit does not work When a function does not work, check hereGeneral Cannot make and receive calls Cordless handset Fax receiving Fax sending Copying Answering device If a power failure occursWhen the recording paper has jammed in the unit Recording paper jam Correct Document jams sending When the recording paper was not fed into the unit properly Thermal head cleaning Document feeder cleaningDo not use paper products, such as paper towels or tissues Help Printer test Setup listReference lists and reports Fax number list Technical data about this product Standard Paper specificationsDuplex procedure RF Transmission Power Approx g Index TAD/FAX Index Page Page 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan