![](/images/new-backgrounds/1266858/266858107x1.webp)
8. Programmable Features
Code #06: Changing the ring setting in TAD/FAX mode
TAD RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in TAD/FAX mode. You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8”, “9”, “TOLL SAVER” or “RINGER OFF”. See page 40 for details.
LSet feature #77 to “TAD/FAX” (page 55) beforehand.
Code #06: Changing the ring setting in FAX ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in FAX ONLY mode.
You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8” or “9”.
L Set feature #77 to “FAX ONLY” (page 55) beforehand.
Code #10: Changing the maximum incoming message recording time
RECORDING TIME
=VOX [±]
“VOX” (default): Unlimited.
Code #11: Setting the remote operation ID
REMOTE TAD ID
=ON[±]
1.Press {MENU}.
2.Press {<} or {>} repeatedly to select this feature.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter any
L The default ID is “222”.
6.Press {SET}.
7.Press {MENU}.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A[±]
You can select “A” (default), “B” or “C”.
Code #19: Setting the clock entry/display
CLOCK DISPLAY
=12H [±]
This feature changes the clock format for when the line is indicated in printed reports and lists, or displayed on the base unit.
“12H” (default): 12 hour clock
“24H”: 24 hour clock
8.3 Advanced features
Code #22: Setting the journal report to print automatically
AUTO JOURNAL
=ON[±]
“ON” (default): The unit will print a journal report automatically after every 30 new fax communications (page 36).
“OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=OFF [±]
If you have difficulty sending an overseas fax, activate this feature before starting transmission.
LThis feature is not available for broadcast
transmission.
LThe calling charge may be higher as the transmission speed is slowed down.
“ON”: After transmission, this feature will turn off automatically.
“OFF” (default): Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF [±]
This feature allows you to take advantage of low- cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.
To send a document:
1.Insert the document.
2.Press {MENU}.
3.Press {#} then {2}{5}.
4.Press {A} or {B} repeatedly to select “ON”.
5.Press {SET}.
6.Enter the fax number.
7.Press {SET}.
52