3. Telephone
3.1 Making phone calls
3.1.1 With the handset
{j}
{C}
{ih}
{<}{>}{e}{v} 
{C}
{R}
Important:
LTo prevent battery consumption, be sure to press {ih} if a busy tone sounds when/after using the handset.
1Lift the handset and press {C}.
2Dial the telephone number.
3When finished talking, press {ih} or place the handset on the base unit.
To redial the last number dialled from the handset
Press {C}, then press {R}.
To redial using the redial list
The last 10 numbers dialled with the handset are stored in the redial list.
1.Press {R}.
LThe last number dialled is displayed.
2.Press {e} or {v} repeatedly to select the number.
LTo exit the list, press {ih}.
3.Press {C}.
To edit a number in the redial list before calling back
1.Press {R}.
2.Press {e} or {v} repeatedly to select the number.
3.Press {>}.
4.Press {e} or {v} repeatedly to display “EDIT CALL NO”.
5.Press {>}.
LThe first digit of the number flashes.
6.Press {<} or {>} to move to the position to the right of where you want to edit the number.
7.Edit the number.
LTo clear a digit, press {C}.
8.Press {C}.
To erase numbers in the redial list
1.Press {R}.
2.Press {e} or {v} repeatedly to select the number.
3.Press {>}.
4.Press {e} or {v} repeatedly to display “CLEAR”.
L If you want to erase all numbers in the list, select “ALL CLEAR”.
5.Press {>}.
6.Press {e} or {v} to select “YES”.
7.Press {>} or {j}.
LTo erase other numbers, repeat steps 2 to 7.
8.Press {ih}.
To store a number from the redial list into the phonebook
Numbers in the redial list can be stored into the phonebook (page 29).
1.Press {R}.
2.Press {e} or {v} repeatedly to select the number.
3.Press {>}.
4.Press {e} or {v} repeatedly to display “SAVE TEL NO”.
5.Press {>}.
L The first 2 digits are the index number.
6.Press {j}.
7.Enter the name, up to 9 characters (see the character table on page 29).
8.Press {j}.
Key lock
You can lock the handset dialling buttons. Only incoming calls are accepted while the key lock is on. Emergency calls cannot be made until key lock is cancelled.
To turn on key lock, press and hold {j} for more than 2 seconds.
LA beep will sound and the following will be displayed.
27
