9. Options
4Press {7}.
5Enter the
6Press the desired handset number.
LThe selected handset number will flash.
7Press {>} or {j}.
8After “SETTING BS” is displayed, press
{ih}.
9.2.2 Cancelling a base unit
You can cancel any base unit that your handset is registered to.
1Press {j}.
2Press {e} or {v} repeatedly to display “SETTING HS”.
3Press {>}.
4Press {e} or {v} repeatedly to display “REGISTRATION”.
5Press {>}.
6Press {e} or {v} repeatedly to display “CANCEL BS”.
7Press {>}.
8Enter the
LThe default PIN is “0000”.
9Press {e} or {v} repeatedly to select the desired base unit number.
10Press {>}.
LThe selected base unit number will flash.
11Press {>}.
12Press {e} or {v} repeatedly to select “YES”.
L To stop cancelling, select “NO”.
13Press {>} or {j}.
14Press {ih}.
9.2.3 Selecting a base unit
When “AUTO” (automatic base unit access) is selected, if you move outside of the radio range of the current base unit, the handset automatically searches for other registered base units.
When a specified base unit is selected, the handset will access that base unit only. Calls (both incoming and outgoing) can be conducted only via the selected base unit, even if the radio cells overlap with neighbouring base units.
LThe default setting is “AUTO”.
1Press {j}.
2Press {e} or {v} repeatedly to display “SETTING HS”.
3Press {>}.
4Press {e} or {v} repeatedly to display “SELECT BS”.
5Press {>}.
6Press {e} or {v} repeatedly to select “AUTO” or a specific base unit number.
7Press {>} or {j}.
LThe handset starts searching for the base unit.
9.3Selecting the ringer mode
You can select how the handsets ring for incoming calls from 3 patterns:
–“1”: All handsets ring (default).
–“2”: Selected handset(s) rings.
–“3”: Selected handset(s) rings, then all handsets ring.
Setting all handsets to ring
1Press {j}.
2Press {e} or {v} repeatedly to display “SETTING BS”.
3Press {>}.
L“INPUT CODE” will be displayed.
4Press {1}.
5Enter the
6Press {1} to select “1”.
7Press {>} or {j}.
8Press {ih}.
Setting the selected handset(s) to ring
1Press {j}.
2Press {e} or {v} repeatedly to display “SETTING BS”.
3Press {>}.
L“INPUT CODE” will be displayed.
4Press {1}.
5Enter the
6Press {2} to select “2”.
63
