![](/images/new-backgrounds/1266858/266858121x1.webp)
8. Programmable Features
5.Press {>}.
6.Press {e} or {v} repeatedly to display “HSPIN CHANGE”.
7.Press {>}.
8.Enter the current
9.Enter the new
10.Enter the new
11.Press {ih}.
Setting the auto talk
1.Press {j}.
2.Press {e} or {v} repeatedly to display “SETTING HS”.
3.Press {>}.
4.Press {e} or {v} repeatedly to display “OTHER OPT”.
5.Press {>}.
6.Press {e} or {v} repeatedly to display “AUTO TALK”.
7.Press {>}.
8.Press {e} or {v} repeatedly to select the desired setting.
“ON”: You can answer a call by just lifting the handset off the base unit without pressing
{C}.
“OFF” (default): Deactivates this feature.
9.Press {>} or {j}.
10.Press {ih}.
Setting the battery type
1.Press {j}.
2.Press {e} or {v} repeatedly to display “SETTING HS”.
3.Press {>}.
4.Press {e} or {v} repeatedly to display “OTHER OPT”.
5.Press {>}.
6.Press {e} or {v} repeatedly to display “BATTERY TYPE”.
7.Press {>}.
8.Press {e} or {v} repeatedly to select the desired setting.
9.Press {>} or {j}.
10.Press {ih}.
Resetting the handset settings to their default settings
The handset can be reset to the following default settings.
The words in parentheses indicate the codes used if the Command Interface is selected for the display language (page 57).
Feature | Default setting | |
Time alarm mode (“F1”) | “OFF” | |
Alarm time | Clear | |
|
| |
Ringer volume (“F21”) | High | |
External ringer pattern | “1” | |
(“F22”) |
| |
Internal ringer pattern | “1” | |
(“F23”) |
| |
Paging tone pattern | “1” | |
(“F24”) |
| |
Alarm tone pattern | “1” | |
(“F25”) |
| |
Key tone (“F31”) | “ON” | |
Call waiting tone (“F32”) | “ON” | |
Range warning alarm | “OFF” | |
(“F33”) |
| |
Battery low alarm (“F34”) | “ON” | |
Standby mode display | “CLOCK” | |
(“F41”) |
| |
Talk mode display (“F42”) | “TALK TIME” | |
Display language (“F43”) | “ENGLISH” | |
Call BAR mode (“F51”) | “OFF” | |
Direct call mode (“F53”) | “OFF” | |
Direct call number (“F52”) | Clear | |
Handset PIN (“F61”) | “0000” | |
Auto talk (“F62”) | “OFF” | |
Base unit access (“F9”) | “AUTO” | |
(page 63) |
| |
Redial memory | All clear | |
|
| |
Receiver volume | Medium | |
|
|
|
1. | Press {ih}. |
|
2. | Press {j}. |
|
3. | Press {v}. |
|
4. | Press {>}. |
|
5. | Press {e}. |
|
59