Marantz PD4292D Setting a computer image to the correct RGB se- lect screen, RGB Select modes

Setting a computer image to the correct RGB se- lect screen

On the computer image select the RGB mode, moving im- age (video) mode, wide mode or digital broadcast.

Example: Setting the RGB SELECT mode to “VIDEO”

Press the 3-D1(ON) button on the remote controller to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “OPTION”, then press the 3-D1(ON) button.

The “OPTION” screen appears.

2.Use the ▲ and ▼ buttons to select “RGB SELECT”.

	O P T I O N
AUDIO INPUT
AUDIO1		: RGB1
AUDIO2		: VIDEO1
AUDIO3		: HD/DVD1
BNC SELECT		: RGB
RGB SELECT		: RGB
HD SELECT		:	1080B
RGB3 ADJ.		:	1
SEL.	ADJ.				RETURN
				EXIT

3.To set the RGB select mode to “VIDEO” ...

Use the ◀ and ▶ buttons to select “VIDEO”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

→ RGB ↔ VIDEO ↔ WIDE ↔ DTV ←

Information

⬛RGB SELECT modes

One of these 4 modes must be selected in order to dis- play the following signals correctly.

RGB	VESA 640×480@60Hz (Use this mode
	for normal computer images.)
VIDEO	To display the video signal that is converted
	to the RGB signal, set this mode.
WIDE	When an 852 dot× 480 line signal with a
	horizontal frequency of 31.72 KHz is in-
	put, the image may be compressed hori-
	zontally. To prevent this, set RGB SELECT
	to WIDE.
DTV	Set this model when watching digital broad
	casting (480P).

⬛Restoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.

O P T I O N

AUDIO INPUT AUDIO1 AUDIO2 AUDIO3

BNC SELECT RGB SELECT

HD SELECT RGB3 ADJ.

:RGB1

:VIDEO1

:HD/DVD1

:RGB

:VIDEO

:1080B

:1

SEL. ADJ. EXIT RETURN

4.Once the setting is completed ...

Press the “OK” button to return to the main menu.

To delete the main menu, press the “OK” button once more.

45

PD4292D-2 45 00.10.4, 3:11 PM