Marantz PD4292D manual Picture Settings Menu, Adjusting the picture, Picture adjustment screen

Picture Settings Menu

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be adjusted as desired.

Example: Adjusting the contrast

Press the 3-D1(ON) button on the remote controller to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “PICTURE”, then press the 3-D1(ON) button.

The “PICTURE” screen appears.

4.Press the 3-D1(ON) button.

The contrast adjustment is completed.

P I C T U R E

CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT		R				G
PICTURE MODE
		:		MEMORY
COLOR TEMP.		:	2
NR		: NR-2
SEL.	ADJ.				RETURN
				EXIT

2. Use the ▲ and ▼ buttons to select “CONTRAST”.

P I C T U R E

CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT	R			G
PICTURE MODE	:		MEMORY
COLOR TEMP.	:	2
NR	:	NR-2

5.Once the adjustment is completed ...

Press the “OK” button to return to the main menu.

To delete the main menu, press the “OK” button once more.

Note: If “CAN NOT ADJUST” appears ...

When trying to enter the PICTURE submenu, make sure PICTURE MODE is set to MEMORY.

SEL. ADJ. EXIT RETURN

3. Use the ◀ and ▶ buttons to adjust the picture.

CONTRAST

*If neither the ◀ or ▶ button is pressed within 5 sec- onds, the current setting is set and the previous screen reappears.

31

Information

⬛Picture adjustment screen

CONTRAST	Changes the picture’s contrast.
BRIGHTNESS ....	Changes the picture’s brightness.
SHARPNESS	Changes the picture’s sharpness.
	Adjusts picture detail of VIDEO
	display.
COLOR	Changes the color density.
TINT	Changes the picture’s tint. Adjust
	for natural colored skin, back-
	ground, etc.

⬛Adjusting the computer image

Only the contrast and brightness can be adjusted when a computer signal is connected.

⬛Restoring the factory default settings

Select “RESET” under the “PICTURE MODE” settings.

PD4292D-2 31 00.10.4, 3:11 PM