Marantz PD4292D manual External Speaker Connections

External Speaker Connections

RGB 3

(Digital RGB)

RGB 1

	SPEAKERS MUST	LEFT
	HAVE MORE THAN		R/CR/PR
	7WATT RATING
	IMPEDANCE 6 OHM	HD2	G/Y
–	+			–	+
		DVD2/
	LEFT		B/CB/PB
	RIGHT	RGB2/	HD
			VD

		RIGHT		1
					L(MONO)
EXTERNAL				AUDIO	R
CONTROL					VIDEO 1
REMOTE					VIDEO 2
CONTROL					VIDEO 3
CONTROL
LOCK	OFF			2	L(MONO)
ON/				AUDIO
					R
					Y
AC IN					CB/CR
					PB/PR
			3		L(MONO)
				AUDIO	R

External speakers may be connected to the plasma monitor to reproduce sound from VIDEO, DVD or RGB signal sources.

External speakers may be connected directly to the SPEAK- ERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs.

CAUTION: Unplug the plasma monitor and all con- nected components before connecting external speak- ers. Use only speakers with 6-ohm impedance and a power output rating of 7 watts or more.

To connect external speakers directly to the plasma monitor:

1.Strip the ends of the speaker wires.

2.Press down the tabs below the SPEAKERS terminals, insert the speaker wire and release the tab to secure the speaker wire connection:

[a]Connect the right speaker (located at right side

of the monitor when viewed from the front) positive (+) wire to RIGHT +.

[b]Connect the right speaker negative (–) wire to RIGHT -.

[c]Connect the left speaker negative (–) wire to LEFT–.

[d]Connect the left speaker positive wire (+) to LEFT+.

22

PD4292D-2 22 00.10.4, 3:10 PM