Marantz PD4292D manual Memo

RC2000MKII keypad and DIRECT function commands will be configured for DSS (digital satellite system) con- trol. We have included DSS commands within the RC2000MKII’s pre-programmed memory for RCA brand DSS equipment. If you have another brand of DSS, you can “teach” the RC2000MKII with the re- mote control codes of your equipment.

0LCD window

The LCD window provides a wealth of information, including function selection name, DIRECT function names, learning and programming steps, as well as use- ful indicators for battery status, and helpful indicators. The LCD window features back-lighting, making it easy to view when the room ambient light is very low.

AVolume up (+) and down (-)

Used to raise and lower the main system volume level. Note that these buttons are clearly the largest size, and are conveniently located and contoured for easy opera- tion, even in low lighting.

BTen keypad

Like a telephone key pad, the ten number buttons (0-9) are used to enter numeric digits, useful for finding a specific track on a CD, or to tune a pre-set radio station, etc.

CMEMO

This button is used to program your CD player’s track memory, or to enter a VCR recording program, and can be used to provide the MEMO function included with other components in your system.

DCLEAR

This button is used to cancel certain memory or pro- gramming operations.

FCURSOR buttons

Some components feature menus that are navigated with up, down, left and right direction commands. The cur- sor buttons can be used to navigate within on-screen menus, for components such as amplifier or receiver, PD4292D, DSS/satellite tuner, etc. These buttons are also used for certain RC2000MKII programming func- tions.

GMUTE

For those components (such as amplifier or receiver, etc.) with a mute function, this button can be used to mute the sound temporarily.

HGUIDE

This button is intended for owners of DSS (digital sat- ellite system) or similar equipment, to activate the on- screen programming guide, used when changing chan- nels etc.

IOSD (On Screen Display)

Some components, such as an amplifier or receiver, PD4292D, etc., feature on screen display for operation and/or programming. The OSD button can be used to activate the on screen display, or turn it off if desired.

JLIGHTING

Press this button to activate the back-lit LCD screen and back-lit keys independently SETUP mode. A quick touch is all that is necessary. The back-lighting will remain on for 3 seconds. If you wish, you can even re- program the RC2000MKII to shorten or lengthen the amount of time the back-lighting is activated when this button is pressed.

KChannel up(▲), down(▼)

Press this button to change the tuner, DSS or VCR pre- set channels to upward or downward.

ETransport control functions

These buttons provide transport commands for your source components, such as laser disc player, CD player, VCR, audio tape deck, etc., and are dependent on the function source selected. For example, when the RC2000MKII is set to LD (laser disc) mode, the trans- port keys will operate the laser disc player’s PLAY,

STOP, PAUSE, FAST FORWARD, FAST REVERSE, NEXT and PREVIOUS track functions. Change the RC2000MKII function selector to VCR, and these keys will then operate the VCR’s transport command func- tions, etc.

7

LTransmitter window

Infrared signals will emanate from behind this window. Simply aim the RC2000MKII towards the component(s) you wish to control. You may find that the RC2000MKII works fine when placed on a coffee table pointing to- wards your A/V system components.

MReceiving window

Used when learning commands from other remotes, this window is placed at the bottom of the RC2000MKII, so that the two remotes are vertically oriented for easy trans- fer of remote control information. Later in this guide we will show you which of the RC2000MKII buttons can be “taught” new commands from other components.

PD4292D-2 7 00.10.4, 3:10 PM