Intel 8I945PE-FS user manual IDE IDE Connector, SATA0/SATA1/SATA2/SATA3 Sata 3Gb/s Connector

Page 14

English

6) IDE (IDE Connector)

An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device).

4039

FS

21

7) SATA0/SATA1/SATA2/SATA3 (SATA 3Gb/s Connector)

SATA 3Gb/s can provide up to 300MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and install the proper driver in order to work properly.

FS

1

7

 

 

 

 

 

 

 

 

Pin No.

Definition

7

 

 

 

 

1

GND

 

 

 

 

2

TXP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

TXN

 

 

 

 

 

 

 

 

4

GND

 

 

 

 

 

 

 

 

5

RXN

 

 

 

 

 

 

 

 

1

 

 

 

 

6

RXP

 

 

 

 

 

 

 

 

7

GND

8I945PE-FS Motherboard

- 14 -

Image 14
Contents 8I945PE-FS 8I945PE Block Diagram Hardware Installation Feature SummaryUse of licensed Award Bios Installation of the CPU and Heatsink HT functionality requirement contentInstallation of the Heatsink Installation of Memory Installation of Expansion Cards Dual Channel Memory ConfigurationI/O Back Panel Introduction Connectors Introduction ATX12V/ATX Power Connector Cpufan / Sysfan Cooler Fan Power Connector FDD Floppy ConnectorIDE IDE Connector SATA0/SATA1/SATA2/SATA3 Sata 3Gb/s ConnectorFpanel Front Panel Jumper Faudio Front Audio Panel Connector Auxin AUX In ConnectorUSB1 / FUSB2 Front USB Connector 12 F1394 Ieee 1394 ConnectorBiosre Bios Recovery Clrcmos Clear CmosBATBattery English Status Page Setup Menu / Option Page Setup Menu Main MenuMain Menu Bios Ver d „ Save & Exit Setup „ Set Supervisor Password„ Set User Password „ Exit Without SavingIDE Channel 0 Master, Slave Standard Cmos FeaturesTime IDE Channel 2/3 Master, SlaveMemory Drive aHalt on Base MemoryBios Flash Protection Advanced Bios FeaturesHard Disk Boot Priority First / Second / Third Boot DevicePassword Check Boot Up Floppy SeekBoot Up Num-Lock CPU Hyper-ThreadingSata Port 1/3 Set to Integrated PeripheralsSata Port 0/2 Set to Power On By Keyboard Onboard LAN Boot ROMPower On By Mouse KB Power on PasswordAC Back Function Onboard FDC ControllerOnboard Serial Port Power Management Setup Acpi Suspend TypeIRQ assigned 3,4,5,7,9,10,11,12,14,15 PnP/PCI ConfigurationsResources Controlled By PC Health Status Memory Frequency Mhz Frequency ControlSystem Memory Multiplier Load Fail-Safe Defaults Load Optimized DefaultsSet Supervisor/User Password Save & Exit Setup Exit Without Saving

8I945PE-FS specifications

The Intel 8I945PE-FS is a motherboard that exemplifies Intel's commitment to delivering high-performance and reliable computing solutions. It is built on the Intel 945P chipset, which supports Intel's LGA 775 socket type processors, allowing users to harness the power of various dual-core and single-core CPUs. One of its main features is the support for Intel's hyper-threading technology, which enables concurrent multithreading. This results in improved efficiency and performance, particularly for multitasking environments.

The 8I945PE-FS supports DDR2 memory, with up to 4 GB of RAM, providing ample memory bandwidth for modern applications and gaming. Additionally, the motherboard's architecture is designed to ensure optimal data flow, which enhances overall system responsiveness and stability. This is crucial for users who demand high performance during intensive tasks such as video editing, gaming, and software development.

On the graphics front, the Intel 8I945PE-FS features integrated graphics capabilities through the Intel Graphics Media Accelerator 950. While integrated graphics have come a long way, users looking for superior graphics performance can utilize the PCI Express x16 slot to install powerful dedicated graphics cards, ensuring compatibility with a wide array of modern GPUs.

The motherboard also provides multiple connectivity options. It includes several SATA ports for connecting high-speed storage devices, as well as IDE support for legacy devices. With USB 2.0 ports, users can connect a plethora of peripherals, from external hard drives to keyboards and mice, enhancing the system's versatility.

In terms of reliability, the 8I945PE-FS includes advanced thermal management features, which help maintain optimal operating temperatures. This is especially important for maintaining system longevity under heavy loads. Furthermore, the board is equipped with several capacitors and other components designed to endure heat, ensuring that users have a long-lasting and stable platform.

The Intel 8I945PE-FS is also compatible with Intel's tools for system monitoring, which allow users to track temperatures and voltages to ensure that the system is operating within safe margins. This is particularly useful for enthusiasts who might be looking to overclock their systems for extra performance.

Overall, the Intel 8I945PE-FS represents a solid choice for users looking for a dependable and feature-rich motherboard, capable of meeting a variety of computing needs while harnessing Intel's cutting-edge technologies.