Intel 8I945PE-FS user manual Drive a, Halt on, Base Memory, Extended Memory, Total Memory

Page 25

Capacity Capacity of currently installed hard disk.

Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.

Cylinder

Number of cylinders

Head

Number of heads

Precomp

Write precomp

Landing Zone

Landing zone

Sector

Number of sectors

Drive A

The category identifies the types of floppy disk drive A that has been installed in the computer.

None

No floppy drive installed

 

360K, 5.25"

5.25 inch PC-type standard drive; 360K byte capacity.

1.2M, 5.25"

5.25 inch AT-type high-density drive; 1.2M byte capacity

 

(3.5 inch when 3 Mode is Enabled).

 

720K, 3.5"

3.5

inch double-sided drive; 720K byte capacity

1.44M, 3.5"

3.5

inch double-sided drive; 1.44M

byte capacity.

2.88M, 3.5"

3.5

inch double-sided drive; 2.88M

byte capacity.

Halt on

The category determines whether the computer will stop if an error is detected during power up.

No Errors

The system boot will not stop for any error that may be detected and you

 

will be prompted.

All Errors

Whenever the BIOS detects a non-fatal error the system will be stopped.

All, But Keyboard

The system boot will not stop for a keyboard error; it will stop for all other

 

errors. (Default value)

All, But Diskette

The system boot will not stop for a disk error; it will stop for all other errors.

All, But Disk/Key

The system boot will not stop for a keyboard or disk error; it will stop for all

 

other errors.

Memory

The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system.

The value of the base memory is typically 512K for systems with 512K memory installed on the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.

Extended Memory

The BIOS determines how much extended memory is present during the POST.

This is the amount of memory located above 1 MB in the CPU's memory address map.

Total Memory

This item displays the memory size that used.

English

- 25 -

BIOS Setup

Image 25
Contents 8I945PE-FS 8I945PE Block Diagram Feature Summary Hardware InstallationUse of licensed Award Bios HT functionality requirement content Installation of the CPU and HeatsinkInstallation of the Heatsink Installation of Memory Dual Channel Memory Configuration Installation of Expansion CardsI/O Back Panel Introduction Connectors Introduction ATX12V/ATX Power Connector FDD Floppy Connector Cpufan / Sysfan Cooler Fan Power ConnectorSATA0/SATA1/SATA2/SATA3 Sata 3Gb/s Connector IDE IDE ConnectorFpanel Front Panel Jumper Auxin AUX In Connector Faudio Front Audio Panel Connector12 F1394 Ieee 1394 Connector USB1 / FUSB2 Front USB ConnectorClrcmos Clear Cmos Biosre Bios RecoveryBATBattery English Main Menu Status Page Setup Menu / Option Page Setup MenuMain Menu Bios Ver d „ Set User Password „ Set Supervisor Password„ Save & Exit Setup „ Exit Without SavingTime Standard Cmos FeaturesIDE Channel 0 Master, Slave IDE Channel 2/3 Master, SlaveHalt on Drive aMemory Base MemoryHard Disk Boot Priority Advanced Bios FeaturesBios Flash Protection First / Second / Third Boot DeviceBoot Up Num-Lock Boot Up Floppy SeekPassword Check CPU Hyper-ThreadingSata Port 0/2 Set to Integrated PeripheralsSata Port 1/3 Set to Power On By Mouse Onboard LAN Boot ROMPower On By Keyboard KB Power on PasswordOnboard Serial Port Onboard FDC ControllerAC Back Function Acpi Suspend Type Power Management SetupResources Controlled By PnP/PCI ConfigurationsIRQ assigned 3,4,5,7,9,10,11,12,14,15 PC Health Status System Memory Multiplier Frequency ControlMemory Frequency Mhz Load Optimized Defaults Load Fail-Safe DefaultsSet Supervisor/User Password Exit Without Saving Save & Exit Setup

8I945PE-FS specifications

The Intel 8I945PE-FS is a motherboard that exemplifies Intel's commitment to delivering high-performance and reliable computing solutions. It is built on the Intel 945P chipset, which supports Intel's LGA 775 socket type processors, allowing users to harness the power of various dual-core and single-core CPUs. One of its main features is the support for Intel's hyper-threading technology, which enables concurrent multithreading. This results in improved efficiency and performance, particularly for multitasking environments.

The 8I945PE-FS supports DDR2 memory, with up to 4 GB of RAM, providing ample memory bandwidth for modern applications and gaming. Additionally, the motherboard's architecture is designed to ensure optimal data flow, which enhances overall system responsiveness and stability. This is crucial for users who demand high performance during intensive tasks such as video editing, gaming, and software development.

On the graphics front, the Intel 8I945PE-FS features integrated graphics capabilities through the Intel Graphics Media Accelerator 950. While integrated graphics have come a long way, users looking for superior graphics performance can utilize the PCI Express x16 slot to install powerful dedicated graphics cards, ensuring compatibility with a wide array of modern GPUs.

The motherboard also provides multiple connectivity options. It includes several SATA ports for connecting high-speed storage devices, as well as IDE support for legacy devices. With USB 2.0 ports, users can connect a plethora of peripherals, from external hard drives to keyboards and mice, enhancing the system's versatility.

In terms of reliability, the 8I945PE-FS includes advanced thermal management features, which help maintain optimal operating temperatures. This is especially important for maintaining system longevity under heavy loads. Furthermore, the board is equipped with several capacitors and other components designed to endure heat, ensuring that users have a long-lasting and stable platform.

The Intel 8I945PE-FS is also compatible with Intel's tools for system monitoring, which allow users to track temperatures and voltages to ensure that the system is operating within safe margins. This is particularly useful for enthusiasts who might be looking to overclock their systems for extra performance.

Overall, the Intel 8I945PE-FS represents a solid choice for users looking for a dependable and feature-rich motherboard, capable of meeting a variety of computing needs while harnessing Intel's cutting-edge technologies.