Intel 430TX user manual NEC* CDR272, NEC* CDR273, Ide

Page 44

 

Torisan* CDR-C3G

NEC* CDR272

 

Torisan* CDR-S1G

NEC* CDR273

Q2>

There is an Exclamation(!) or Question(?) mark next to the

 

primary or secondary IDE controller instance under Device

 

Manager where devices are connected.

-OR-

 

The secondary IDE controller instance is missing under

 

Device Manager and devices are connected to this cable.

A2>

There are several possible causes for this issue:

1.Your CD-ROM drive may need be configurated as a slave drive. Please refer to Item A1 for a detailed description.

2.There is a hardware conflict in the system. Only TWO

IDE

channels are allowed in a system. The driver will not

operate on systems that have a non-Intel IDE controller or a sound card with an IDE interface. The driver should not be de-installed on these systems.

3.The system BIOS may not have initialized the

 

82371xB IDE controller

properly.

Again, please

 

contact your system provider for BIOS upgrade. If the

 

system fails to operate reliably, de-install the driver.

Q3>

The system does not operate reliably

or fails to boot when

 

the driver

is installed.

-OR-

 

 

The system fails to boot in

NORMAL (non SAFE-MODE)

 

mode when the driver

is installed.

 

A3>

Please de-install the driver.

Please make sure that your

 

system meets the system requirements of the driver and you

 

don't have any non- supported IDE devices or applications

 

installed on the system.

 

 

 

 

Please refer to the Release Notes section for supported

 

devices and

applications.

 

 

44

Image 44
Contents USER’S Manual Update Inforamtion Content Chapter Eide Hardware Installation for TX2 Preface Simple features Page Chapter Map of ATX586 Mother Board NON-ACTIVE MMXAMD JP8/91-2 Short CPUJP15 2MB Flash Bios only Short 256K PB SramInstall System Dram Memory Install IDE, Enhanced I/O and Front Panel Connectors GND PIN-3 Irtx PIN-4 VCC IRQ DRQ Game COM1COM2 COM3JP8 JP9CN1 COM1 CN2 CN3Page Chapter Bios Features Setup Chipset Features Setup PNP/PCI Configuration Post Read Cmos data into Bios stack area If Eisa NVM checksum is good, execute Eisa initialization Write all Cmos values currently in the Bios stack area back If there is any changes in the hardware configuration Quick Installation Guide Page System Requirements Contents of this DocumentIntroduction Contents of the Distribution Package SETUP.EXESETUP.INS BMIDE95.EXEInstalling the Software SETUP.DLLSETUP.LIB Verifying Installation of the Driver Page DE-INSTALLING the Software SB, ABPage Troubleshooting Common ProblemsPage 8A. IDE Devices Supported by the Driver \WINDOWS\SYSTEM\IOSUBSYSRelease Notes 8B. Applications Supported by the Driver 8C. Large IDE Fixed Disk Drive 528MB Support by the Driver 8D. RELEASE-SPECIFIC Troubleshooting Information NEC* CDR251CDU55E NEC* CDR261 CDU76E NEC* CDR271IDE NEC* CDR272NEC* CDR273 One or more of the IDE/ATAPI drives on the system fail to CD-ROM DOS=HIGH,UMB 8E. Revision History InformationVersion 2.64 Release Version 3.00 Release8F. Release Testing Information CFA540ACFS425A CFS850A IBMNEC CRD-S54P CDU55E CDU76E CDU77E CDU311-GI Teac CD44E CD56EPage From the Bios of new main board to old main board Hardware Installation For TX2 SHORT, 2-4 Open Map of TX2 Mother Board JP8 4-5 Short for CyrixShort for 5v Flash Bios normal. Default Open Normal Power mode. Default Total Install IDE, Enhanced I/O and Front Panel Connectors USB+, PIN-4 GND LPT3 3BC-3BF JP1JP3 JP4Pin Definition for Cable Connection

430TX specifications

The Intel 430TX chipset, introduced in the mid-1990s, was a significant advancement in computer technology, primarily designed to support Intel's Pentium processors. This chipset catered to the growing demand for improved multimedia performance, better system stability, and expanded features to accommodate developing applications.

One of the main features of the Intel 430TX was its support for Dual Independent Bus architecture. This allowed for simultaneous data transfers between the CPU and the memory, significantly improving system performance. The chipset supported up to 512 MB of EDO (Extended Data Out) RAM and featured a memory bus that could handle speeds of up to 66 MHz, making it suitable for a variety of applications ranging from home computing to business use.

Another significant characteristic of the 430TX was its integration of a PCI (Peripheral Component Interconnect) bus, which allowed for higher bandwidth compared to the older ISA (Industry Standard Architecture) connections. The chipset provided up to five PCI slots, facilitating the addition of modern peripherals like graphics cards, sound cards, and network interfaces without compromising system performance. This flexibility was vital as multimedia applications became increasingly common during that era.

The Intel 430TX also incorporated support for the newer ATA/33 standard for hard drives, allowing for faster data transfer rates compared to previous standards. This enhancement contributed to improved overall system responsiveness. Moreover, the chipset partially supported USB (Universal Serial Bus) devices, paving the way for the increasingly popular external peripherals that were emerging at the time.

In terms of power management, the 430TX featured advanced management capabilities, allowing the system to achieve better energy efficiency through features such as ACPI (Advanced Configuration and Power Interface) support. This was particularly important as users began to prioritize environmental concerns alongside performance.

Overall, the Intel 430TX chipset represented a balance of performance, compatibility, and innovative feature integration. Its legacy is evident in the foundational technologies it helped propel, influencing the design and features of future chipsets. Today, revisiting the Intel 430TX illustrates the rapid technological evolution that has occurred since its introduction, underscoring its importance in the development of modern computer systems. The 430TX was pivotal in bridging the gap between early PC architectures and the advanced systems we utilize today.