Intel 2804040 user manual Expansion Interface

Page 33

2804040 User’s Manual

Hardware Setup

2.17 <Expansion Interface>

2804040 has one PCI-Express 16x slot and one Mini-PCI socket onboard. PCI-Express is the last expansion interface technology, for its serial data transfer scheme, each lane will be up to 500MB/s (duplex), and the 16x (16 lanes) can be up to 8GB/s more than 2GB/s as AGP

8x bus transfer rate. The 16x slot can be also for 1x compatible use.

PCIE (PCI-Express 16x slot)

MINIPCI

Mini-PCI Card installation:

 

1. Slot in the card at 45 degree

2. Press the card onto the socket

 

 

to hear a click sound

3. to remove the card,

 

 

please pull out the

 

 

locker on the socket.

Expansion Interface

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents
2804040 Disclaimer TrademarkUser’s Manual Packing List Other AccessoriesHardware Cable KitIndex Hardware SetupUser’s ManualInd ex IntroductionBios Setup Appendix a I/O Port Pin Assignment System ConfigurationAppendix D Programming GPIOs………………………………………………59 User’s Manual Ind exThis Page is Left for Blank Product Overview IntroductionProduct Specification Multi-I/O PortVGA Display Interface Ethernet Interface Power and EnvironmentAudio Interface Expansive InterfaceComponent Placement Component PlacementBlock Diagram Block DiagramIntel Pentium 4 with 775 pin Plga processor Intel 945GMechanial Drawing Mechanical DrawingConnector Location User’s Manual Hardware SetupConnector Location Jumper Reference Cmos Operating/Clear SettingJumper Function Jumper ReferenceInternal Connectors Connector ReferenceExternal Connectors Connector FunctionCPU and Memory Setup CPU installationCPU Installation Memory Installation Memory installationCmos Setup Cmos SetupJumper Jrtc Type Onboard 3-pin jumper ModeEnhanced IDE Interface Enhanced IDE interfaceSerial ATA Installation Serial ATA installationFloppy Installation Floppy InstallationLAN Installation LAN installationAudio Installation Audio InstallationConnector Cdin User’s Manual Introduction Connector CnaudioConnector Spdif Pin DescriptionDisplay Installation Display InstallationIEEE1394 and USB Installation IEEE1394 and USB InstallationInterface IEEE1394 USB2.0 VCC Power and Fan Installation Power and Fan Installation PIN assignment Gpio Interface Gpio interfaceSerial Port Pin Number Pin AssignmentSerial Port Switch and Indicator Switch and IndicatorExpansion Interface Expansion InterfaceUser’s Manual This Page is Left for Blank System Configuration Sata configurationParallel ATA Serial ATA Sata Mode On-Chip Serial ATA mode Sata RAID Configuration Sata RAID ConfigurationRAID 5 striping with parity RAID 10 RAID 0+1User’s Manual System Configuration Select Actions to Create RAID Volume Repeat the to create second volume as RAID Level Audio Configuration Video Memory Setup User’s Manual Fixed + Dvmt Memory Size System On-Chip FixedTotal Memory Frame Graphic Buffer Size Display Properties Setting Display Properties SettingDevices PEG Force PCI-Express interface settingPCI-Express Interface setting Bios SetupUser’s Manual Bios Setup This Page is Left for Blank Appendix a I/O Port Pin Assignment Connector SATA1/2/3/4IDE Port Serial ATA PortFloppy Port IrDA PortUser’s Manual P o r t Pin Assignment LAN Port VGA PortPin Description TRD0+ TRD0- TRD1+ PinIeee 1394 Port SMBusUser’s ManualI/O P o r t Pin Assignment Appedix B System Resources B1.I/O Port Address MapUser’s Manual System Resources User’s Manual P o r t Pin Assignment B2.Memory Address Map B3.System IRQ & DMA Resources Appedix C Flash Bios Bios Auto Flash ToolFlash Method Programming GPIO’s Appendix D Programming GPIO’sUser’s Manual Con tact Information Contact Information
Top Page Image Contents