Cambridge Audio Azur 840EW user manual Multi-room connections, Pre Out Right Left, Open, Stop

Multi-room connections

The 840E features Incognito Ready/A-	Multi-Room
	Keypad 1	IR1	IR3
BUS Ready outputs, allowing multi-room
	International Patent Pending
	LeisureTech Electronics Pty Ltd

capability. One or two amplified keypads	PSU
	In
can be plugged into the 840E (using
Cat5/5e cable and RJ45 plugs) to provide	Keypad 2	IR2	IR4
multi-room audio in one or two secondary

rooms or zones. The keypads are powered by an external PSU (also required) through the Cat5/5e cables and no mains connection is required in the secondary rooms.

Speakers (e.g. SS10)
connected via	AS10
speaker cable	Passive
	Speaker

KP10-EU keypad

AS10

Active

Speaker

LR10

PS5

Cat5/5e (up to 30m / 100ft)

840E

Multi-Room

Input 2 Balanced Audio

Input 1 Balanced Audio

Keypad 1

IR1

IR3

On

Power

Designed in London, England

Trigger

IR Emitter

Control Bus

RS232C

Off

Power Rating: 230V AC ~ 50Hz

In

Out/Thru

In

In

Out

PSU

azur 840E Pre-Amplifier

In

Max Power Consumption: 36W

www.cambridge-audio.com

CAUTION

AVIS ACHTUNG

Keypad 2

IR2

IR4

Right

Left

Right

Left

Balanced

Out Pre

Balanced Pre Out

Flat / 200Hz L.P.

2 Out Rec

1 Out Rec

In Rec

7 Input

6 Input

5 Input

4 Input

3 Input

2 Input

1 Input

L

L

L

L

Unbalanced

Input 1

Balanced

R

R

R

R

Power AC

Unbalanced

Manufactured

Pre Out

Right

Left

Sub Out

Rec Out 2

Rec Out 1

Rec In

Input 7

Input 6

Input 5

Input 4

Input 3

Input 2

Input 1

Input 2

(Unbalanced)

(Unbalanced)

in an ISO9001

approved facility

		IR10
						azur 840C
						Upsampling Compact Disc Player
			Open	Play		Skip
Standby / On	Menu	Select	Close	Pause	Stop	Scan
			PROGRAM
						840C
			Mini-jack lead
			3098092
			Conforms to ANSI/UL STD 60065
			7th Edition 2003 Rev 2006/03/20
			Certified to CAN/CSA STD C22.2
			No. 60065-03

The 840E is Incognito Ready Type II, which means the keypads can operate independently of the amplifier in terms of volume/bass/treble etc, be independently turned on and off, and can also listen to a different source from that which is currently selected on the amplifier. However, both keypads can only listen to the same source.

A-BUS is a standard that allows compatibility between different manufacturers equipment, so A-BUS compatible keypads from other manufacturers can also be used. If used with our own Incognito KP10 keypads, there are some extra features such as the ability to change source on the 840E from the keypad (EU model shown here):

Order of selection: 1. Input 1

2. Input 2

3. Input 3

4. Input 4

5. Input 5

6. Input 6 (Tape)

Connections to the 840E Incognito Ready / A-BUS Ready outputs are made by Cat-5 cable (terminated with an RJ45 jack plug). The RJ45 plug must be wired to the EIA/TIA 568A wiring standard:

Wire colours:	3.	Orange/White	6.		Orange
1. Green/White	4.	Blue		7. Brown/White
2. Green	5.	Blue/White	8.		Brown

8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8

Plug view from	View into	Gather pairs, trim	Crimp wires
contact end	socket	and insert into	securely in place
		RJ45 plug

To allow control of your source equipment from the remote rooms an IR emitter (IR10) is plugged into one of the IR outputs on the rear of the unit and then attached over the IR window of the source unit. Alternatively, on our own products that feature IR emitter Inputs, a mini- jack to mini-jack lead can be used. Commands received by the keypads can now be sent back to the source equipment via the 840E.

It is then possible to control the source equipment from the remote rooms by using the source equipment's own remote controls or through a learning remote. The Incognito LR10 Learning Remote can fully control the keypads, “learn” the source's remote control codes (including those from other manufacturers) and change source input on the 840E etc.

On the front panel display of the 840E the extra multi-room zones are indicated by a circle outline next to the input source (see Fig. 1). When listening to the same source, the circle outline and solid circle overlap (see Fig. 2).

Fig. 1 - One or both keypads are listening to a different source (Input 2) to the amplifier (Input 1).

Mode

Volume

Fig. 2 - One or both keypads are listening to the same source (Input 2) as the amplifier (Input 2).

Mode

Volume

For further details on the Incognito multi-room system please contact your local Cambridge Audio dealer or visit: www.cambridge-audio.com

14