Model IC612
Channel Vision’s ARIA™ IC612 6.5”
Features:
6.5” High performance
High power handling capacity
Recommended power: 20W to 160W (peak)
Gold speaker terminals
Proprietary pivoting “Pole Piece” technology with 1” voice coil.
Polypropylene woofer with butyl rubber surround and an 18 ounce magnet
Small perforated designer grill
Mounting screws (4)
2
Installation:
Use the provided template to mark and cut a 7- ¾” hole in drywall away from ceiling joists.
We recommend wiring with AWG 16 or larger, stranded wire.
For proper phasing, both speakers must be wired alike. Connect red wires to red terminals on the speakers and to red or plus terminals on the amplifier.
Install IC612 in the hole. Tighten the mounting screws. The mounting “dogs ears” will rotate outward and grip the drywall. DO NOT OVER TIGHTEN the screws. A battery operated drill on a “low clutch” setting is recommended.
Aim tweeter
To control the volume of the speaker locally, use an impedance matching volume control, such as the Channel Vision VC300.
Specifications:
Frequency range: | 45Hz - 20kHz ± 6dB |
Crossover: | 12dB/octave (low pass) |
| 12dB/octave (high pass) |
Sensitivity: | 90dB (1W/1m) |
Power Handling: | 160 Watts peak |
Drivers: | 1- 1” Soft dome tweeter |
| 1- 8” polypropylene woofer |
Magnet: | |
Impedance: | 8 ohms |
Finish: | ABS plastic |
Dimensions: | 9” OD. 4” height |
| (from surface of wall board) |
| hole size: |
| Specifications subject to change without notice. |
3