Troubleshooting
Troubleshooting gives you solutions to problems that may occur during installa- tion and operation of the Internet Station.
Problems during initial installation
No power to the Internet Station
•Verify that the power cable is firmly connected.
•Make sure the outlet is working by connecting a known working device.
•Press the Power button on the front panel.
PC Card LED blinks continuously
•Turn off the power and then turn it back on.
PC Card LED does not light
•Verify that the PC Card modem seats firmly in the slot.
•Make sure that it is not inserted diagonally, upside down, etc.
•Press the Power button off and on to detect a new PC card.
•Try the other PC card slot in the Internet Station.
•Try another PC card.
Problems during client installation
I cannot browse to the Internet Station
•Verify that the correct address shows in your browser location field:
istation or
192.168.42.254
•Check the LAN light on the Internet Station. If it does not light, check the network cable connections at the Internet Station and the hub. If it is connected, but the LAN light still isn’t lit, try a new cable.
•Press the Power button off and on.
•Check the TCP/IP setup on your PC. On Windows* 95:
Run winipcfg from Run on the Start menu. The PC should have an IP address of 192.168.42.n, where n is from 1 to 127. If the
Intel® InBusiness™ Internet Station | 21 |