IP address is not in this range, click Release and then click Renew.
On Windows NT*:
Type the following from the command prompt: ipconfig
The PC should have a network address of 192.168.42.n, where n is from 1 to 127. If the IP address is not in this range, type the following commands:
ipconfig /release ipconfig /renew
•Make sure your browser is not set up to connect through a proxy server. If it is, disable this setting:
In Internet Explorer:
Click Internet Options on the View menu, then click the Connection tab and disable the “Access the Internet using a proxy server” check box.
In Netscape Navigator:
Click Network Preferences on the Options menu, then click the Proxies tab, and click No Proxies.
I cannot connect to the Internet
•Check the telephone line. If it is a regular analog line, connect a telephone and see if you get a normal dial tone. Manually dial your ISP number to see if you get a modem tone.
•Browse to the Internet Station home page. Click the Setup Wizard button and verify that the telephone number and other ISP settings are correct.
•Do you have to dial 9 first for an outside line?
•Review the Check alerts on the Internet Station Home Page.
Other Internet Station problems
I forgot my password
•If you set up your password security and forgot the password, you must reset the Internet Station. This clears all of your current configurations.
•Push the reset button on the back of the Internet Station, located between the PC Card slots and the Serial port. Hold the button in for 5 seconds.
•Your Internet Station resets to the original factory setup.
22 | Intel® InBusiness™ Internet Station |