Intel 4.0A manual Data sharing on MCUs, System 4.0 Only Using Dashboard-like Utility

Page 10

Data sharing on MCUs

Lucent MCU 4.4 and Video Server 5.3 experience data-sharing difficulties. Microsoft Office 97* application are not properly shared to all participants and may not be visible at all endpoints. The Whiteboard tool may experience similar problems. This may also be noticed if an endpoint leaves the conference and then reenters.

LAN/WAN Network or TCP/IP Setup and Connection Information

Installing TCP/IP or TCP/IP Connection Type is disabled

Installation of TCP/IP on the Intel® TeamStation™ System is required to make LAN (Local Area Network) calls and for use of the Intel TeamStation Document Server services. Without this installation the LAN TCP/IP Connection Type and the Intel TeamStation Document Server services will be disabled. The TCP/IP protocol does not come preinstalled on the system due to the customization required during its installation. For installation instructions, read the Installing TCP/IP section.

System Monitoring and Repair Tools Information

Restore procedures

The restore process has a "pause" period after copying files from the Microsoft Windows NT* 4.0 Workstation CD- ROM. For 10 seconds after completing the copy, if any key on the keyboard is pressed, it will stop the restore procedure. To continue the restore process press the Y key. Not pressing any keys during this pause period avoids this issue. For complete instructions and information refer to the Restore Procedure section.

System 4.0 Only: Using Dashboard-like Utility

For information on monitoring the ISDN B channels and troubleshooting using the dashboard-like utility refer to the Dashboard-like Utility section.

Image 10
Contents System 4.0 Restore Procedure TeamStation System 4.0 and 4.0aSystem 4.0a Restore Procedure System 4.0 and 4.0a Installing TCP/IP Installing ATI 3D Rage Pro* Display Driver System Reset Disable the automatic gain adjustTrain the Voicecrafter Set the Mic Default GainSave the Configuration Check the Loudspeaker GainHow to use the Dashboard like utility Reset 29 inch NEC Multisync to factory default settingsDashboard-like Utility Page First channel shows 2 lights, but then the call disconnects Audio Information Clicking noise using the mute functionVideo Information Display adapter not correctly configured Video image distortion on white surfacesSystem 4.0 Only Using Dashboard-like Utility Data sharing on MCUs