Dashboard-like Utility | Intel 4.0A specification

•Reset 29 inch NEC Multisync to factory default settings

The Intel® TeamStation™ System ships with an optional Monitor. Use the following instructions to reset the NEC MultiSync* 29 inch monitors to factory defaults.

Default Settings for the NEC MultiSync* XV29:

Press the "Recall" key on the remote control and use the following information to verify the settings.

Volume	112
Mute	off
Woofer on	(**should be off**)
Brightness	128
Contrast	195
V-size	156
V-position	78
H-size	210
Pincushion	189
Rotation	125
Bass	120
Treble	113
Balance	128

Default Settings for the NEC MultiSync XM29:

Dip switch settings are located on the back of the monitor.

Dip SW-1:

on	off	on	off	off	off	off	on
1	2	3	4	5	6	7	8
Dip SW-2:
off	off	off	off	off	off	off	on
1	2	3	4	5	6	7	8

•Dashboard-like Utility

The Dashboard-like utility is designed to keep track of the status of both B (bearer) channels on your ISDN line during an Intel® TeamStation™ System connection. The Dashboard-like utility puts an icon in the systray to graphically monitor the B channels. The icon has 2 columns, and each column has 4 color bars. The columns represent each of the B channels, and the bars represent the progress of the connection.

How to use the Dashboard like utility

Watch the lights on the icon. On the first column, rows 1 and 2 should turn yellow, and then rows 1,2,3,4 turn green when first making a connection. Row 4 may turn red or row 3 may turn blue, briefly. This is normal. If they stay red or blue, then there is a problem. Next, the second column should repeat the process.

Description:	Dashboard displays (after Succeeding):
Establish a connection	(First and Second rows turns Yellow)