Intel EX-98211 FANLESS CELERON manual RS-422/485, Gpio Function Jumper, Hardware Installation

Page 13

RS-422/485, GPIO Function Jumper

Chapter 3 Maintenance

Hardware Installation

The EX-98211 is designed to be modular, slim and lightweight for easier maintenance. The following section describes simple hardware installations.

3.1 Remove Top Cover

1. Locate 6 screws which secure the top cover.

2.Use screw driver to remove the top cover screws. Keep the screws safelyfor later use.

3.Pull the top cover slightly upward.

3.2 Installing CPU

1.Locate 6 screws which secure the Thermal Lump.

2.Use screw driver to remove the 6 screws. Keep the screws safely for later use.

Image 13

Contents EX-98211 Compact-sized General Information IntroductionSystem Packing ListFront View Power Information I/O Ports ArrangementBack View Engine of EX-98211 Introduction DimensionsEX-98211 Main Board Bottom View Jumpers and ConnectorsEX-98211 Main Board Connector Setting JRS1 RS-232/422/485 Selection JP1 LAN LED Connector IDE1 Primary IDE Connector SATA1~2 S-ATA1 Connector LPT1 Parallel Port ConnectorCFD1 Compact Flash Disk Share IDE1 USB1 Connector USB Port 5 VGA1 CRT Connector LAN1/LAN2 Connector USB Port 1, 2 ~ USB Port 3DVI1 DVI Connector AUDIO1 Audio Interface Port PWRIN1 DC Adapter Power Input Installing CPU Hardware InstallationRS-422/485, Gpio Function Jumper Remove Top CoverPage Installing CF Card Installing Memory ModuleRemove Bottom Cover Installing Hard Disk Drive Installing Riser Card Installing Wall-mount Bracket