Intel Pentium M Box PC, EX-98211 FANLESS CELERON manual Installing Riser Card

Page 18

5. Connect the SATA cable between the HDD and the Main Board.

3.7 Installing Riser Card

1.Insert PCI card into the PCI slot.

2.Locate the screw on the slot bracket.

3.Use screw driver to remove the screw. Keep the screw safely for later use.

Image 18

Contents EX-98211 General Information Introduction Compact-sizedPacking List SystemPower Information I/O Ports Arrangement Front ViewBack View Dimensions Engine of EX-98211 IntroductionJumpers and Connectors EX-98211 Main Board Bottom ViewEX-98211 Main Board Connector Setting JRS1 RS-232/422/485 Selection JP1 LAN LED Connector IDE1 Primary IDE Connector LPT1 Parallel Port Connector SATA1~2 S-ATA1 ConnectorCFD1 Compact Flash Disk Share IDE1 LAN1/LAN2 Connector USB Port 1, 2 ~ USB Port 3 USB1 Connector USB Port 5 VGA1 CRT ConnectorDVI1 DVI Connector AUDIO1 Audio Interface Port PWRIN1 DC Adapter Power Input RS-422/485, Gpio Function Jumper Hardware InstallationInstalling CPU Remove Top CoverPage Installing Memory Module Installing CF CardRemove Bottom Cover Installing Hard Disk Drive Installing Riser Card Installing Wall-mount Bracket