Quick Installation

1. Connect power cord

Connect the power cord to a properly grounded AC outlet.

2.Connect video cable

•Make sure both the monitor and computer are turned OFF.

•Connect the video cable to the computer.

Macintosh® users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter.

To order a ViewSonic® Macintosh adapter, contact ViewSonic.

See “Customer Support” on page 13.

3.Turn ON monitor and computer

Turn ON the monitor, then turn ON the computer. This sequence (monitor before computer) is very important.

Note: At this point Windows users may receive a message asking them to install the INF ﬁle.

4.Install Display Optimization files (INF and ICM ﬁles)

Insert the ViewSonic® Wizard CD- ROM into your computer’s CD-ROM drive.

Note: If your computer does not have a

CD-ROM drive, see “Customer Support” on page 13.

Wait for the CD-ROM to auto-start.

Note: If the CD-ROM does not auto- start:

double-click on the CD-ROM icon in Windows Explorer, then double-click

on viewsonic.exe.

Follow the on-screen instructions.

5.Windows users: Set the Timing Mode (resolution and refresh rate) Example: 1600 x 1200 @ 85Hz.

For instructions on changing the resolution and refresh rate, see the graphic card’s user guide.

Installation is complete. Enjoy your new ViewSonic® color monitor.

To be best prepared for any future customer service needs: print this user guide and write the serial number in “For Your Records” on page 3.(See back of monitor.)

To register your product go online to www.viewsonic.com.

The ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration form which you may mail or fax to ViewSonic®.

Ports for optional BNC video cables

Port for DB-15 video cable

LINE

INPUT

Power Cord

from monitor to AC outlet

		SOG
	R G B H/H+V V	ON
	R G B H/H+V V	OFF
		OFF

ViewSonic

RG B H/H+V V

Power Cord from computer to AC outlet

ViewSonic G225f/G225fB/G225fSB